Anonymous

Tatton Show

So, what’s happening on the classic car scene, especially wedge related events? Post your notices on here and let us all know about it.
silverseven
TRemendous
Posts: 4451
Joined: 11 Dec 2003 23:44
Location: Canada
Contact:

Postby silverseven » 05 Jun 2012 09:11

nice job on the wet pics, the cars there look to be of a very nice quality even with the conditions!

-actually it's fumy how you guys (or British car enthusiasts in general) still attend shows when the weather is wet, over here they cancel the events outright when the temps are gloomy.

Ron.
ImageImageImage

lancsman
Rust Hunter
Posts: 199
Joined: 20 Aug 2010 06:47
Location: United Kingdom
Contact:

Postby lancsman » 05 Jun 2012 09:31

Could somebody enlighten a relative newcomer please.

When looking at the photos on this thread, and actually whilst I was at Tatton on Saturday, I noticed that some of the TR7/8's are fitted with one-piece front bumpers that don't have the separate end pieces.

Were these after market replacements?

Thanks.

Lancsman

rosey
Wedge Pilot
Posts: 466
Joined: 04 Nov 2004 20:08
Location: United Kingdom
Contact:

Postby rosey » 05 Jun 2012 10:10

Not aftermarket, these were for the American market and are rubberised one-piece, the rear ones have the large over-riders, again one-piece rubber.

This was all part of the proposed legislation in the states that required the bumpers to absorb impact without distortion, I seem to remember 5 mph was the figure the designers used but 3 mph was the actual figure required by the legislation when it appeared.

I have the US spec fitted to the front of my DHC but it doesn't have the harmonic dampener that the 3 piece UK spec bumper has, it doesn't weigh much either though in compensation[:)]

Dave

"Do or Do not, there is no try" - Yoda

1981 Purple Grinnal 2.0L
1980 TR7 Persian Aqua Drophead.
1977 TR7 FHC Tahiti Blue

lancsman
Rust Hunter
Posts: 199
Joined: 20 Aug 2010 06:47
Location: United Kingdom
Contact:

Postby lancsman » 05 Jun 2012 11:24

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by rosey</i>

Not aftermarket, these were for the American market and are rubberised one-piece, the rear ones have the large over-riders, again one-piece rubber.

This was all part of the proposed legislation in the states that required the bumpers to absorb impact without distortion, I seem to remember 5 mph was the figure the designers used but 3 mph was the actual figure required by the legislation when it appeared.

I have the US spec fitted to the front of my DHC but it doesn't have the harmonic dampener that the 3 piece UK spec bumper has, it doesn't weigh much either though in compensation[:)]<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Thanks Dave. Now I understand.

So, where do I find an American spec. front bumper? (Please don't say America).

Lancsman


Dave

"Do or Do not, there is no try" - Yoda

1981 Purple Grinnal 2.0L
1980 TR7 Persian Aqua Drophead.
1977 TR7 FHC Tahiti Blue

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

reychris
Scuttle Shaker
Posts: 72
Joined: 28 Apr 2009 22:08
Location: United Kingdom
Contact:

Postby reychris » 05 Jun 2012 11:36

I went on Saturday and despite the unexpected drizzle it was a great show as usual.
Some more photos, I loved the big Mercedes 600

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0252.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0250.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0247.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0246.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0240.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0239.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0236.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0223.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0215.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0209.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0206.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0205.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0197.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0272.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0169.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0270.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0266.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0259.jpg[/img][/img]

[img][IMG]http://i797.photobucket.com/albums/yy260/reychris/Tatton%2012/DSC_0258.jpg[/img][/img]

Chris

Roy Hankins
Swagester
Posts: 773
Joined: 17 Apr 2006 18:22
Location: United Kingdom
Contact:

Postby Roy Hankins » 05 Jun 2012 12:42

Cheers for that John. [:)]

I would love to get my hands on that Inca Yellow pre-production Speke
built drophead.

I take it this Alain chappy is no longer a member of the TR Drivers club and so this rare car has just vanished.
Such a crying shame.[:(]
Can't we track him down ?

The Pre-production drophead at the show was very original. It still
had fixed head coupe doors that have had their frames cut off and
rivetted to the quarter lights. Also on the bulkhead inside the engine bay screwed in place there was a lot of sound deadening which looked to me to of be done by the factory.
Rare 77 stamped alloys as well, and single bulge bonnet.

Very arty pictures Chris, My Michelle would be impressed.

Roy

Chris Turner
TRemendous
Posts: 2716
Joined: 12 Apr 2004 13:25
Location: United Kingdom

Postby Chris Turner » 05 Jun 2012 17:09

Imagewww.triumphtrs.co.uk
THE Coca Cola car
The C+C Conversions rally car
TR7 Sprint
TR7V8 rally car

Chris Turner
TRemendous
Posts: 2716
Joined: 12 Apr 2004 13:25
Location: United Kingdom

Postby Chris Turner » 05 Jun 2012 17:10

Thanks to all TR Drivers club members who brought their cars to Tatton for the club stand. The rain kept the numbers down but the display was a credit to the club.
Thanks also to Jim Johnson and Stuart Holmes for organising the TR7/8 display.

www.triumphtrs.co.uk
THE Coca Cola car
The C+C Conversions rally car
TR7 Sprint
TR7V8 rally car

John Clancy
TRiffic
Posts: 1666
Joined: 07 Jan 2005 12:31
Location: United Kingdom
Contact:

Postby John Clancy » 05 Jun 2012 17:28

Last time I heard from Alain he was talking about taking the car back to France with him so it could still survive. It would seem a few of the pre-production cars escaped from the factory so there could be one or two more out there.

<center><b>[url="http://www.triumphdvd.co.uk"]Triumph TR7 and other car documentaries on DVD here[/url]</b></center>

rosey
Wedge Pilot
Posts: 466
Joined: 04 Nov 2004 20:08
Location: United Kingdom
Contact:

Postby rosey » 05 Jun 2012 18:52

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by lancsman</i>

[quote]<i>Originally posted by rosey</i>

Not aftermarket, these were for the American market and are rubberised one-piece, the rear ones have the large over-riders, again one-piece rubber.

This was all part of the proposed legislation in the states that required the bumpers to absorb impact without distortion, I seem to remember 5 mph was the figure the designers used but 3 mph was the actual figure required by the legislation when it appeared.

I have the US spec fitted to the front of my DHC but it doesn't have the harmonic dampener that the 3 piece UK spec bumper has, it doesn't weigh much either though in compensation[:)]

Thanks Dave. Now I understand.

So, where do I find an American spec. front bumper? (Please don't say America).

Lancsman


Dave

"Do or Do not, there is no try" - Yoda

1981 Purple Grinnal 2.0L
1980 TR7 Persian Aqua Drophead.
1977 TR7 FHC Tahiti Blue

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

A couple of choices, wait for one on EBay or £300 from Rimmers for a second hand one, I know what I would do[:0]


"Do or Do not, there is no try" - Yoda

1981 Purple Grinnal 2.0L
1980 TR7 Persian Aqua Drophead.
1977 TR7 FHC Tahiti Blue

silverseven
TRemendous
Posts: 4451
Joined: 11 Dec 2003 23:44
Location: Canada
Contact:

Postby silverseven » 06 Jun 2012 01:44

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by lancsman</i>



So, where do I find an American spec. front bumper? (Please don't say America).


<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">


-- well they were also available in Canada ...............


[:D][:D][:D]

Ron.
ImageImageImage

tr7jim
Wedgista
Posts: 1144
Joined: 04 Nov 2003 19:47
Location: United Kingdom
Contact:

Postby tr7jim » 09 Jun 2012 14:17

Thanks to all the TR7/8 owners especially the Drivers club members who brought their cars to Tatton for the club stand. This three day Jubilee event was down due the rain mainly but considering the weather the display was a credit to the TR7/8.
Thanks agian to Stuart Holmes for organising the TR7/8 display with my help of course.

See pictures below from the three days

Image


Image

Image

Image

Image


Image

Image

Image

Image

Last picture his Paul Ruddy ex car, which was better than new and attracted many viewers on Monday. This was the best day to finish off this show, unfortuneately the new owner left before prior to the show awards, so stuart will be sending out a trophy shortly. I have also sent out a trophy today to Chris Reynolds car for saturdays awards. Thanks again to all the TR7/8 owners who sent their forms in and hope you will be attending next year show.

Jim Johnson
TR Drivers Club Membership Secretary

fixed-head
Rust Hunter
Posts: 103
Joined: 04 Jan 2011 18:44
Location: United Kingdom
Contact:

Postby fixed-head » 11 Jun 2012 08:06

Hello all,
I have now found out why the orange 'ex-Ruddy' car wasn't included in the TR7 awards, it actually won 1st place in Best British Sports Car class but we had no reg. no. and details (judge went home early).

The Trophy will now be posted to THE BEST BRITISH SPORTS CAR, ....I think we all knew the TR7 was the best British Sports Car anyway!!!

So congratulations to Graham, the award is on it's way!

Really sorry about the weather for everyone, especially for those who traveled a long distance. I'm sure if one year we get fine weather all weekend we will fill our section easily!

We had 16 entered for Saturday, 27 + 2 late entries for Sunday and 14 including a few lates for Monday.

Lot's were from a long way south where the weather was even worse than here, so understandable they didn't set out (weather/flood warnings in some areas!!)

Despite the weather, the stand on all 3 days was superb with 1 car coming all the way from Belgium, which gave the display an International feel!

Roll on next year, back to 2 days, no bank holiday and hopefully lovely weather!!

Thanks to all for supporting our efforts to promote the TR7/8's and thanks to TR Reg (Red Rose) boys for mowing our grass and to Bob Eccles for bringing the other Coke TR7 all the way up from their HQ!

Cheers
Stuart

Post Reply

Who is online

Users browsing this forum: No registered users and 164 guests