Anonymous

Front Console Ground Wire

The all purpose forum for any TR7/8 related topics.
Post Reply
kermit
Rust Hunter
Posts: 146
Joined: 15 Sep 2006 19:57
Location: USA
Contact:

Front Console Ground Wire

Postby kermit » 24 Apr 2014 11:41

I pulled the front console off to replace the radio and found a black ground wire had come loose and not sure where it goes. The wire comes from the harness (right side of the heater box) that feeds the front console lighting panel, cigar lighter & AC switches.

The lighting panel has a single red/white wire coming out of the same harness but no ground wire.

Should the ground wire be tied into this panel somewhere?

Image

Image
1980 TR8 DHC - Poseidon Green
1980 TR7 DHC - Brooklands Green

DutchTriumph
Rust Hunter
Posts: 140
Joined: 16 Aug 2010 10:33
Location: Netherlands
Contact:

Postby DutchTriumph » 24 Apr 2014 14:05

Isn't this the ground, to put on the bolt on the backside of the radio?

Cheers,
Peter

1977 TR7 FHC, 1976 Spitfire 1500

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 24 Apr 2014 14:12

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by DutchTriumph</i>

Isn't this the ground, to put on the bolt on the backside of the radio?<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Think he noted that one as different

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants
Image

kermit
Rust Hunter
Posts: 146
Joined: 15 Sep 2006 19:57
Location: USA
Contact:

Postby kermit » 24 Apr 2014 14:35

The ground from the radio to the chassis bolt is separate.

How is the console lighting grounded?

Image
1980 TR8 DHC - Poseidon Green
1980 TR7 DHC - Brooklands Green

kermit
Rust Hunter
Posts: 146
Joined: 15 Sep 2006 19:57
Location: USA
Contact:

Postby kermit » 25 Apr 2014 11:23

Took a closer look at the 4 light fixtures on the console bar and noticed fragments from a broken wire on one of the lights. Seems to make sense that there would be one R/W wire and one B wire coming from the loom and connecting to one of the 4 lights. The R/W and B wires then jump over to the other 3 lights.



Image
1980 TR8 DHC - Poseidon Green
1980 TR7 DHC - Brooklands Green

Post Reply

Who is online

Users browsing this forum: No registered users and 325 guests