Anonymous

Track Day in a DHC......

The all purpose forum for any TR7/8 related topics.
Post Reply
busheytrader
TRemendous
Posts: 3145
Joined: 14 Oct 2007 17:49
Location: United Kingdom
Contact:

Track Day in a DHC......

Postby busheytrader » 27 Aug 2010 13:26

Has anyone taken a track day in their DHC?

Apart from a crash helmet was there any special preparation needed like a roll bar, advisable I know, but do they allow you on the track without one?

Adam





Image

TR7 V8 DHC Jaguar Solent Blue. 9.35cr Range Rover V8, Holley 390cfm, JWR Dual Port, 214 Cam, Lumention, Tubular Manifolds, S/S Single Pipe Exh, 3.08 Rear, 200lb Spax & PolyBushes all round, Anti- Dive, Strut-Top Roller Bearings, Capri Vented Discs & Calipers, Braided Hoses, 4 Speed Rear Cylinders, Uprated Master Cylinder & Servo, AT 5 Spokes and Cruise Lights, S/S Heater Pipes, Replacement Fuel Tank. No Door Stickers. Mine since July 1986, V8 from 1991

Beans
TRemendous
Posts: 7795
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Postby Beans » 27 Aug 2010 16:18

Yes, but most important is to uprate your brakes!

<center>Image
<font color="blue"><i>1980 TR7 DHC (my first car, now restored and back on the road)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="2"><font color="red">My Weblog</font id="red"></font id="size2"></b></u>[/url]</b></i></center>

john
TRiffic
Posts: 1648
Joined: 22 Sep 2003 13:54
Location: United Kingdom
Contact:

Postby john » 27 Aug 2010 16:55

certanly not

in fact heres me in mine.

take it at your own pace and build up with each lap but don't go at it like a bull at a gate

http://www.youtube.com/watch?v=mYJDVVXtK_0


[8 whole cylinders worth of punch to ram the world through the windshield and out the rear view mirror. Car & Driver]
1981 Grinnall TR7 v8
1981 Black FHC
1979 & 1980 Black Premium FHC(laid to rest) Sorry :-(
Image

John

PeterTR7V8
TRemendous
Posts: 2914
Joined: 10 Jun 2008 02:22
Location: New Zealand
Contact:

Postby PeterTR7V8 » 27 Aug 2010 20:50

It depends on the event rules & your own sense of self-preservation but here you would need a roll cage with a modified car.

Standard brake pads will need a rest after every few laps & you will need to be aware of oil surge with the RV8. Watch for the oil light when you get on the power out of a corner. If it is an issue overfill the sump to 1/2 inch over the high mark. If you have a breather/catch tank system keep an eye on the tank. The Rover likes to accumulate oil at the top & if it starts to pump actual oil into the breather line the catch tank will fill up in a couple of laps.

So, come in after 2 laps & check everything before & approach your limits from the safe side. Have fun & don't turn in to the corners too early!

Image

The map: http://tinyurl.com/wedgemap . The blog: http://www.forum.triumphtr7.com/topic.asp?TOPIC_ID=8548

john
TRiffic
Posts: 1648
Joined: 22 Sep 2003 13:54
Location: United Kingdom
Contact:

Postby john » 28 Aug 2010 17:27

hmmm i think most track days are a bit tamer over here i've done a couple now and as i said there can be anything from an mg midget to an old alfa to an aston martin

i doubt you will be turning your tyres to molten rubber or your brakes for that matter

[8 whole cylinders worth of punch to ram the world through the windshield and out the rear view mirror. Car & Driver]
1981 Grinnall TR7 v8
1981 Black FHC
1979 & 1980 Black Premium FHC(laid to rest) Sorry :-(
Image

John

Post Reply

Who is online

Users browsing this forum: No registered users and 359 guests