Anonymous

petrol/bio ethanol

The all purpose forum for any TR7/8 related topics.
Post Reply
Sautie
Rust Hunter
Posts: 220
Joined: 30 Jun 2010 10:54
Location: South Africa
Contact:

petrol/bio ethanol

Postby Sautie » 19 Mar 2015 05:01

SA is on the road to introducing Ethanol into our petrol. The literature lists many problems with this particular with our Triumphs not being used daily. I believe that this mixture is used in the UK. Does any one have solutions to the problems?

TR Tony
TRemendous
Posts: 2882
Joined: 29 Oct 2004 13:38
Location: United Kingdom
Contact:

Postby TR Tony » 19 Mar 2015 07:09

There is a very informative report on this matter here:

http://www.groups.tr-register.co.uk/wes ... pdate.html

The only problem I have experienced is degradation of rubber fuel lines - I replaced the engine bay fuel hoses on my 7 about 2 years ago with what I thought was ethanol resistant hose, it has already started to crack.

Tony
ImageImage
<font size="1">1981 TR7 FHC Cavalry Blue
1980 TR7V8 DHC Jaguar Regency Red - sadly sold!
1977 TR8 FHC EFI Factory development car Inca Yellow</font id="size1">

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Postby Hasbeen » 19 Mar 2015 07:35

We only had it as an option here, a bit cheaper than proper petrol. It certainly caused havoc with any natural rubber.

However Tony, your cracking hose may be from another cause, or made worse by one.

I fitted new fuel hose labelled "GATES" always the best quality in the past. It split radially with in 12 months dumping 23 litres of petrol on the shed floor over no more than 6 days. The petrol soaked tyres were throwaway.

We also had a new oil cooler hose on the 8's transmission fail in 26 kilometres.

Our transmission bloke gave us the reason. Much US stuff is now made in Mexico, & is of similar quality to some Indian stuff. He advised we use only hose, for any use, labelled made in USA. He also suggested we use only the higher pressure injection fuel hose.

That was a few years back now, & we've had no further hose problems.

Hasbeen

FI Spyder
TRemendous
Posts: 8917
Joined: 03 Jul 2006 19:54
Location: Canada

Postby FI Spyder » 19 Mar 2015 12:42

Not unusual to have bad rubber these days. Ethanol in fuel makes it "dryer". I use FI injector cleaner in my car(s) and think some of the carb cleaner stuff will do the same for carb cars in making the fuel less "dry". This may or may not be effective. In this local some gas uses some ethanol some don't and you can get an idea what doesn't on the internet etc. For example Shell hi test doesn't have it, Co-op all grades don't have it and so on. It will vary depending on where you get your gas from. On the West Coast most of our gas comes from Washington state Cherry Point refinery (from across the border). Makes more sense than shipping it across the Rockies from Alberta.

It is said it takes two gallons of fuel (in energy expended) to make one gallon of ethanol so it doesn't makes sense to use it. It's a concession to the farmers who grow corn (areas that use sugar cane like Brasil which is a better, more efficient way to do it). Also a feel good thing and a vote getting mechanism to the environmental crowd that ignore science in favour of said feel good moment.

- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra - Yellow TCT
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 323 guests