Anonymous

Missing Heater Ducting

The all purpose forum for any TR7/8 related topics.
Post Reply
REPLIC8
Wedgista
Posts: 1204
Joined: 07 Jul 2008 20:03
Location: United Kingdom
Contact:

Missing Heater Ducting

Postby REPLIC8 » 10 Nov 2013 19:49

Noticed on my car today the heater duct for the passenger side windscreen was not connected beneath the grill on the dashboard. On further inspection I found the entire duct from heater to screen is missing, I assume as this car is totally unmolested that it left the factory without this part being fitted!! So much for the production problems being sorted a Solihull.
Would anybody happen to have the parts I'm missing spare? They are XKC 768 lower demister duct & YKC 573 upper demister duct. I think they're handed parts so need to be for the passenger side. [:)]


Image

Andy
1981 TR7 FHC

Maxwell
TRiffic
Posts: 1641
Joined: 19 Jun 2008 21:30
Location: United Kingdom
Contact:

Postby Maxwell » 10 Nov 2013 20:36

Andy - not sure what the part looks like, but I'm fairly sure I have some black piping around 3-inch diameter that came from the car we broke... Left and right....
Is this what you are looking for?

Maxwell [:)]


2.0 TR7 FHC \ Current
1.8 Mazda MX5 \ Current

dursleyman
TRiffic
Posts: 1572
Joined: 11 Jun 2007 22:55
Location: United Kingdom
Contact:

Postby dursleyman » 10 Nov 2013 22:31

I have got all of those plastic pipes/ducts from a couple of cars, if you can just identify which bits you want. I am in Gloucestershire.

Russ

1980 TR7 Sprint DHC
Dursley
UK

http://tr7russ.blogspot.co.uk/

Image Image

Reddragon
Rust Hunter
Posts: 172
Joined: 04 May 2008 17:51
Location: USA
Contact:

Postby Reddragon » 11 Nov 2013 10:33

I believe what he is in need of is the left hand side black plactic directional housing that has a retangular base that snaps into the bottom of the heater than directs the air on to the windshield. The part numbers are correct but Rimmers does not have pictures, only lists as upper duct and duct. This unit is usually secured with 2 screws to the dashboard at the base of the windshield. Top is about 10 inches x 2 with slots for the air to come out of.

I have a very old catalog from which I am giving this description.

Hope this helps.

Dale
1974 TR6
1977 TR7 FHC

REPLIC8
Wedgista
Posts: 1204
Joined: 07 Jul 2008 20:03
Location: United Kingdom
Contact:

Postby REPLIC8 » 11 Nov 2013 17:35

Dales description is pretty good. Here is the picture from the parts book I have with the relevant parts highlighted.
Russ, if these are the bits you have I'd be interested.

[img][IMG]http://i473.photobucket.com/albums/rr92/REPLIC8-2008/scanandy1_zps964ced7c.jpg[/img][/img]

Image

Andy
1981 TR7 FHC

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 11 Nov 2013 18:42

Do you need 2 & 3 ?
Image

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants
Image

dursleyman
TRiffic
Posts: 1572
Joined: 11 Jun 2007 22:55
Location: United Kingdom
Contact:

Postby dursleyman » 11 Nov 2013 22:33

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by REPLIC8</i>

Dales description is pretty good. Here is the picture from the parts book I have with the relevant parts highlighted.
Russ, if these are the bits you have I'd be interested.

[img][IMG]http://i473.photobucket.com/albums/rr92/REPLIC8-2008/scanandy1_zps964ced7c.jpg[/img][/img]

Image

Andy
1981 TR7 FHC

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

I will have a look on the shelf tomorrow and report back.

Russ

1980 TR7 Sprint DHC
Dursley
UK

http://tr7russ.blogspot.co.uk/

Image Image

TR Tony
TRemendous
Posts: 2882
Joined: 29 Oct 2004 13:38
Location: United Kingdom
Contact:

Postby TR Tony » 12 Nov 2013 09:45

You should keep it original Andy, exactly as it was built [:D]

I too had Solihull build quality issues with my coupe. Like yours it was totally original & unmolested when I bought it, with 4,500 miles on the clock & had been in storage for 23 years. The first time I drove it at night I noticed that the green lights above the heater/ventilation levers were not working. I eventually got round to removing the cover & found that the light were there & indeed they all worked fine, but the bulbs were just shoved back in the wiring, not clipped into place above the green lenses. Whoever fitted the cover obviously just couldn't be bother to fit the bulb holders in place first! Still, at least I had the parts actually on the car [:)]

Tony
ImageImage
<font size="1">1981 TR7 FHC Cavalry Blue
1980 TR7V8 DHC Jaguar Regency Red - sadly sold!
1977 TR8 FHC EFI Factory development car Inca Yellow</font id="size1">

dursleyman
TRiffic
Posts: 1572
Joined: 11 Jun 2007 22:55
Location: United Kingdom
Contact:

Postby dursleyman » 12 Nov 2013 15:08

OK quick rummage on the top shelf and found these bits which I think are the ones you need. Bit dusty but otherwise fine.
They are yours for the price of the postage or you can collect from Dursley. They weigh almost nothing so post should not be too much.

Image

Russ

1980 TR7 Sprint DHC
Dursley
UK

http://tr7russ.blogspot.co.uk/

Image Image

REPLIC8
Wedgista
Posts: 1204
Joined: 07 Jul 2008 20:03
Location: United Kingdom
Contact:

Postby REPLIC8 » 12 Nov 2013 15:56

Thanks Russ, that's fantastic. PM me your address and I'll sort you a cheque for postage & a couple of beers! [:D]

Image

Andy
1981 TR7 FHC

dursleyman
TRiffic
Posts: 1572
Joined: 11 Jun 2007 22:55
Location: United Kingdom
Contact:

Postby dursleyman » 12 Nov 2013 20:36

PM sent

Post Reply

Who is online

Users browsing this forum: No registered users and 358 guests