Fresh air hood / plenum / duct / foam seals.

[supercass]

I have made up some new foam seals for the side of this item. The originals were glued on. Unfortunately having removed the glue residue and having a memory marginally better than a goldfish I can't remember how the originals fitted. Anyone got a photo of them in the correct position? (Have done a search) Many thanks in anticipation.supercass

[DNK]

I have a PDF of the instructions


Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants

[supercass]

Hi Don,

Are you able to share this on the forum, or PM me (once I sort out how to add my email to my profile). Regards, supercass

[DNK]

Somebody else made some up and their is that PDF
Just email me your email

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants

[FI Spyder]

I cut out the foam in the shape of the side cut out but a little larger, then slit around the ends so it slide over the metal and is glued in place with contact cement. Before mounting, cut a upside down T in it so the release cable can fit down and move forward and back as necessary and not leave a gaping hole.

- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra - Yellow TCT

[Ianftr8]

Any chance of posting some photos or the PDF instructions? In the twenty odd years that I have owned TR7s & my 8 I don't think I have seen these extra seals on the plenum.

Cheers
Ian

Ian Freeman
1979 TR8 DHC KDU 315V
Triumph Courier
Triumph owner for 32 years

[DNK]

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants