Anonymous

USA spec steering wheel

The all purpose forum for any TR7/8 related topics.
Post Reply
Bobbieslandy
Wedgista
Posts: 1471
Joined: 15 Feb 2007 18:52
Location: United Kingdom
Contact:

USA spec steering wheel

Postby Bobbieslandy » 06 Sep 2010 00:59

I've always wanted one, i don't know why but they seem to look a lot better for some reason. The only trouble is i can't start the engine now from outside the car, the crash pad gets in the way.

Image

God she looks dirty, didn't realise until i saw the pic.

Rob.

ImageImageImage

V8Wedgehead
Swagester
Posts: 971
Joined: 27 May 2008 22:30
Location: USA
Contact:

Postby V8Wedgehead » 06 Sep 2010 02:13

Yeah real dump! NOT! Looks good beacuse its a wedge! In the US we have the same issue witht he crash pad and turning the key from out side.

Michael
1980 TR8 FHC #0020 Rally Conversion
Image

tencate
Rust Hunter
Posts: 134
Joined: 27 Oct 2007 03:16
Location: USA
Contact:

Postby tencate » 06 Sep 2010 03:32

Didn't I read somewhere that that very crash pad was actually meant to house an airbag at one point? Maybe not, but it sure kinda looks like it could!

Stag76
Swagester
Posts: 691
Joined: 22 Jun 2010 04:14
Location: Australia
Contact:

Postby Stag76 » 06 Sep 2010 09:33

My ex US car converted to RHD has the ignition switch on the right hand side of the steering column...easy to access from outside in a RHD car.

TR7 Convertible
Sprint Motor
MegaSquirt EFI

V8Wedgehead
Swagester
Posts: 971
Joined: 27 May 2008 22:30
Location: USA
Contact:

Postby V8Wedgehead » 06 Sep 2010 13:26

I think and this could be right or wrong but with all the US crash laws and collapsable steering columns maybe the crash pad was added as an extra to keep the driver from being impailed by the steering column........maybe an issue at 150 in a head on crash but at 5mph or even 50mph I would find it diffecult to see the need?

Michael
1980 TR8 FHC #0020 Rally Conversion
Image

Bobbieslandy
Wedgista
Posts: 1471
Joined: 15 Feb 2007 18:52
Location: United Kingdom
Contact:

Postby Bobbieslandy » 06 Sep 2010 15:08

I can imagine after a crash, the driver would have "TRIUMPH" stamped on his/her forehead. How the paramedics would keep a straight face is anyones guess[:D]



ImageImageImage

PeterTR7V8
TRemendous
Posts: 2914
Joined: 10 Jun 2008 02:22
Location: New Zealand
Contact:

Postby PeterTR7V8 » 06 Sep 2010 19:31

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Bobbieslandy</i>

I can imagine after a crash, the driver would have "TRIUMPH" stamped on his/her forehead. How the paramedics would keep a straight face is anyones guess[:D]

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Only if you were rather short.[:0]

Image

The map: http://tinyurl.com/wedgemap . The blog: http://www.forum.triumphtr7.com/topic.asp?TOPIC_ID=8548

Bobbieslandy
Wedgista
Posts: 1471
Joined: 15 Feb 2007 18:52
Location: United Kingdom
Contact:

Postby Bobbieslandy » 06 Sep 2010 23:29

my seats are very low[:D]

The airbag theory sounds good, trouble is a car needs a complete re-design to incorporate one. My Land Rover Defender is a good example, it's too stiff to have them, as i believe is the TR7. I think the rate of which a car crumples has a lot to do with the time it takes for an airbag to inflate. The landy, should it hit a concrete wall would put a lot of force on the body almost instantly therefore giving an airbag no time to inflate and do its job properly. A modern car would decelerate a lot more slowly due to its crumple zones thus giving the the airbag a chance to fully inflate and do its job. Were Airbags around in mass production form that long ago? i think they only became standard in this country around 1995. I had a head on colision with an audi 100 whilst driving a nissan micra. a few years back i would of said the micra driver would of come off worst. After kicking the door open i walked away winded and with a few bruises. the Audi driver had a broken wrist and was knocked out.

ImageImageImage

catmanboo
Rust Hunter
Posts: 200
Joined: 01 May 2009 01:23
Location: USA
Contact:

Postby catmanboo » 07 Sep 2010 01:31

it's a simple matter to remove the crash pad, if you can handle the look. it also lightens the wheel by a couple of pounds. I was surprised by how much it weighs, & the whole steering wheel assembly probably weighs as much as 3 aftermarket units[:0] I guess I'm lucky; mine came equipped with a Mountney unit already installed. I couldn't figure out why the signals wouldn't self-cancel until I saw no projections on back of wheel to trip the switches; cured that by installing a couple screws in the pre-threaded holes in back of it. in the meantime, I could likely use the stock unit as an anchor for my canoe![:D] it just occured to me that the factory likely put that pad on there to help us Yanks to cope with the generally unskilled/careless American drivers. just bang head on the pad to blow off steam- no damage to either steering wheel or driver's noggin![8D]

Bobbieslandy
Wedgista
Posts: 1471
Joined: 15 Feb 2007 18:52
Location: United Kingdom
Contact:

Postby Bobbieslandy » 07 Sep 2010 01:40

Any moves made to lighten the car, even if it's just the steering wheel, are a complete waste of time when i haul my larger frame in the car[:D] (i had to retype that, in light of the recent events of offensive postings!)

When i took the original steering wheel out and fitted the USA style one i didn't notice the difference.

Rob.

ImageImageImage

tr8
Wedgista
Posts: 1172
Joined: 20 Apr 2004 16:20
Location: Canada
Contact:

Postby tr8 » 07 Sep 2010 01:48

The Group 44 TR8 uses the crash pad as a headrest...no kidding.

Image

Image

trv8
Wedgista
Posts: 1112
Joined: 20 Dec 2007 17:22
Location: United Kingdom
Contact:

Postby trv8 » 07 Sep 2010 05:53

Brilliant idea. Looks like it was made for the job [^].

laskaboots
Wedgling
Posts: 49
Joined: 24 Sep 2007 14:36
Location: USA
Contact:

Postby laskaboots » 07 Sep 2010 15:50

is that an oil pressure gauge on the dash top? I was wondering
where I could mount the one I have as I could find no convenient location where I could see it easily. does it interfere with seeing
out the windshield?

trv8
Wedgista
Posts: 1112
Joined: 20 Dec 2007 17:22
Location: United Kingdom
Contact:

Postby trv8 » 07 Sep 2010 16:03

Cut a hole above the Facia side vent. Fits in nice there [:)].

RadioGuy
Swagester
Posts: 534
Joined: 10 Apr 2010 15:11
Location: USA
Contact:

Postby RadioGuy » 07 Sep 2010 22:05

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">The Group 44 TR8 uses the crash pad as a headrest...no kidding.<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Got to love that !!![:D]

ImageImageImage
Maintained on Saturday…Drive on Fun-Day !!! 1976 FHC - 1980 DHC

Post Reply

Who is online

Users browsing this forum: No registered users and 228 guests