Anonymous

Original engine bay pictures anyone ?

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
stevie_a
TRemendous
Posts: 3326
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Re: Original engine bay pictures anyone ?

Postby stevie_a » 04 Mar 2017 13:24

I wanted it back to standard as it only had 18000 miles, and i wanted a car i could drive without looking at my wallet to see how much fuel i could afford to put in . :D
Last edited by stevie_a on 05 Mar 2017 10:33, edited 1 time in total.
If it's not broke don't fix it.

supercass
Swagester
Posts: 625
Joined: 07 Sep 2009 02:12
Location: United Kingdom
Contact:

Re: Original engine bay pictures anyone ?

Postby supercass » 04 Mar 2017 17:01

tr7dan, The cable grip is actually listed as part number UKC 4636. I had always thought it was intended to secure the tube to the air filter box and I'm puzzled that it seems to be loose midway along the tube. supercass

Steve @ SandS
Wedge Pilot
Posts: 397
Joined: 14 Nov 2003 20:02
Location: North West
Contact:

Re: Original engine bay pictures anyone ?

Postby Steve @ SandS » 04 Mar 2017 19:14

stevie_a wrote:I wanted it back to standard as it only had 18000 miles, and i wanted a car i could drive without looking at my wallet to see how much fuel i could afford to put in . :D


To be fair I have never really found the V8 to be that much more uneconomical
Steve @ S&S Preparations
www.ss-preparations.co.uk

tr7dan
Rust Hunter
Posts: 117
Joined: 18 Jun 2009 22:53
Location: United Kingdom
Contact:

Re: Original engine bay pictures anyone ?

Postby tr7dan » 05 Mar 2017 10:17

supercass wrote:tr7dan, The cable grip is actually listed as part number UKC 4636. I had always thought it was intended to secure the tube to the air filter box and I'm puzzled that it seems to be loose midway along the tube. supercass


Could the zip tie in the brochure pic which is midway along the hot air tube be part no. AAU1843 (page1L 03L) and would it only be fitted on cars with a RH coolant tank mounting ?

I had thought that UKC4636 was the big metal 'P' clip which fastens to the top of the thermostat cover (although it doesn't look like the drawing in the parts book). If it isn't then what's the part no for the 'P' clip and which page is it on - I can't find it and I don't think I have one ?

thanks

Dan

stevie_a
TRemendous
Posts: 3326
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Re: Original engine bay pictures anyone ?

Postby stevie_a » 05 Mar 2017 10:51

Steve @ SandS wrote:
stevie_a wrote:I wanted it back to standard as it only had 18000 miles, and i wanted a car i could drive without looking at my wallet to see how much fuel i could afford to put in . :D


To be fair I have never really found the V8 to be that much more uneconomical


I don't think a V8 could go from Glasgow to Billing towing a camping trailer and still return 37 to 39 mpg as i can on my 2.0L

Even in a traffic jam like this :shock:

Image
If it's not broke don't fix it.

busheytrader
TRemendous
Posts: 3145
Joined: 14 Oct 2007 17:49
Location: United Kingdom
Contact:

Re: Original engine bay pictures anyone ?

Postby busheytrader » 05 Mar 2017 16:34

I can match 0 mpg at 0 mph.......

Back in the day 1986 to 1991 with the 2.0L engine I used to get 33mpg at a steady 70mph and 22mpg commuting through suburbia. As a funday and sunny day V8 I get 16 to 22mpg but that's with a Holley on the top and not the lightest of right feet. 8)
Image

TR7 V8 DHC Jaguar Solent Blue. 9.35cr Range Rover V8, Holley 390cfm, JWR Dual Port, Lumention, Tubular Manifolds, S/S Single Pipe Exh, 3.08 Rear Axle, 200lb Spax & PolyBushes all round, Anti- Dive, Strut-Top Roller Bearings, Capri Vented Discs & Calipers, Braided Hoses, 4 Speed Rear Cylinders, Uprated Master Cylinder & Servo, AT 14" 5 Spokes or Maestro Turbo 15" Alloys, Cruise Lights, S/S Heater Pipes, Replacement Fuel Tank. No Door Stickers. Mine since July 1986, V8 from 1990 courtesy of S&S V8 conversion kit (built not bought) and big brake kit.

jeffremj
Wedgista
Posts: 1285
Joined: 02 Jan 2005 22:47
Location: United Kingdom
Contact:

Re: Original engine bay pictures anyone ?

Postby jeffremj » 05 Mar 2017 17:17

I also used to get 22mpg on a year's commute in the V8. On the same commute, I got 25 mpg average in my TR7 16V.

Post Reply

Who is online

Users browsing this forum: No registered users and 101 guests