Anonymous

Ball Joint nut....

The all purpose forum for any TR7/8 related topics.
Post Reply
Rblackadar
TRiffic
Posts: 1782
Joined: 06 Jun 2004 06:12
Location: USA
Contact:
Contact Rblackadar

Ball Joint nut....

Postby Rblackadar » 14 Sep 2010 16:53

I replaced everything on the right front suspension and was wondering about the castle nut for the nall joint....There is no hole for the cotter pin on my Quinton Hazell ball joints... What's up with that?
Top
Marsu
Swagester
Posts: 570
Joined: 03 Oct 2009 20:57
Location: Australia
Contact:
Contact Marsu

Postby Marsu » 14 Sep 2010 16:56

When I replaced mine (some years ago) they didn't have a hole either, but came with new nyloc nuts.
Top
windy one
Swagester
Posts: 840
Joined: 27 Oct 2008 19:57
Location: USA
Contact:
Contact windy one

Postby windy one » 14 Sep 2010 16:56

The ones I reciently bought were the same way. But came with a nylock-nut. Several hundred miles driven so far, still good [:D]

Johnny
Top
Ianftr8
Swagester
Posts: 900
Joined: 12 Dec 2007 17:09
Location: United Kingdom
Contact:
Contact Ianftr8

Postby Ianftr8 » 14 Sep 2010 16:57

Just had to replace one of mine, it would seem that the modern stuff replaces the castle nut and split pin with a nyloc nut.

Must be cheaper!

Cheers
Ian

Ian Freeman
1979 TR8 DHC California car that never crossed the pond, started life as KDU 315V.
1962 Triumph Courier
Top
Bobbieslandy
Wedgista
Posts: 1471
Joined: 15 Feb 2007 18:52
Location: United Kingdom
Contact:
Contact Bobbieslandy

Postby Bobbieslandy » 14 Sep 2010 17:44

yup, nyloc nut here too.

ImageImageImage
Top
john 215
TRemendous
Posts: 6867
Joined: 03 Dec 2006 17:12
Location: United Kingdom
Contact:
Contact john 215

Postby john 215 » 14 Sep 2010 17:48

Hi,

As long as the thread is the same, how about torque the nut up and drill the ball jiont so keeping an original look, if thats what you are after. The majority of modern cars use nylocs and they work ok, a little to well at times when the taper breaks as you are undoing the nut so the whole bl88dy pin spins [:(!]

Cheers John

LIVE LIFE A QUARTER OF A MILE AT A TIME!
1979 3.5 FHC(STATUS PENDING!!)
Image
1982 2.0 DHC NOW A 4.6,ON THE ROAD NOW KICKING AR5E !!!!
Top
prlee
Swagester
Posts: 504
Joined: 24 Jun 2008 19:55
Location: United Kingdom

Postby prlee » 14 Sep 2010 18:20

Confused, my Spitfires which predate the TR7 I currently have always had nylocs. My late model TR7 suprised me because it had a castle nut.

So the newer car is an older design than the 1967 Spit I had????

Pete
81 DHC (MOT and tax, nearly finished)
79 Spitfire (big hole found in floor)
Image ImageImage
Top
DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:
Contact DNK

Postby DNK » 14 Sep 2010 20:39

Pete- You owned the Spitty since new?

Don
"No More Cars For You"
71 TR6- Perpetual remodel
80 TR7 V8 Kick in the pants
Top
Rblackadar
TRiffic
Posts: 1782
Joined: 06 Jun 2004 06:12
Location: USA
Contact:
Contact Rblackadar

Postby Rblackadar » 17 Sep 2010 11:52

OK I may go with nylocs...how do I find Grade 8.8 nylocs? usually they don't have any marking system on them, and I don't want to use generic ones to find they are strong enough.
Top
DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:
Contact DNK

Postby DNK » 17 Sep 2010 15:43

RB, do you have a fastener tore near you. Around here we have Tacoma Screw and Fastenal to name just a couple. What I would use instead of a nylock is a metal lock.

Don
"No More Cars For You"
71 TR6- Perpetual remodel
80 TR7 V8 Kick in the pants
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 364 guests