Anonymous

Shock Absorber Mounting

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
Mel
Wedgling
Posts: 6
Joined: 19 Feb 2008 19:26
Location: United Kingdom
Contact:

Shock Absorber Mounting

Postby Mel » 16 Mar 2008 17:47

Just spent a pleasant afternoon wrestling the petrol tank out of my dhc. It would have been a lot easier if I could have removed the LH side shock absorber. The manual says remove an access plate in the boot to get to the top mounting but the only access plate I have is for the RH petrol filler side. There appears to be a domed access under the carpet on the back shelf inside the car but before I start disturbing the trim can someone confirm if this is the way to go. Thanks.


john 215
TRemendous
Posts: 6867
Joined: 03 Dec 2006 17:12
Location: United Kingdom
Contact:

Postby john 215 » 16 Mar 2008 18:15

Hi Mel,
That will be what you are after, undo the 3 pozi drive srews and seperate from the sealant type stuff,lift it off and there will be your shock top [:)]
Cheers John

LIVE LIFE A QUARTER OF A MILE AT A TIME!
1979 3.5 FHC(STATUS PENDING!!)
Image
1982 2.0 DHC NOW A 4.6 WILL BE ON THE ROAD VERY SOON!
Read My Blog http://www.waringstowntr7s.co.uk/blogs/ ... hp/John215

bmcecosse
TRemendous
Posts: 2399
Joined: 14 Apr 2007 21:54
Location: United Kingdom
Contact:

Postby bmcecosse » 26 Mar 2008 18:49

Yes - it's under the carpet - one each side. The HBOL (Haynes Book of Lies) lives up to it's reputation! I found it essential to take both rear dampers off to get the tank out.

ImageImage

Post Reply

Who is online

Users browsing this forum: No registered users and 300 guests

cron