Anonymous

Ebay warning

The all purpose forum for any TR7/8 related topics.
john 215
TRemendous
Posts: 6867
Joined: 03 Dec 2006 17:12
Location: United Kingdom
Contact:

Postby john 215 » 30 Jan 2008 22:13

Hi,
Looks like a Sherpa based servo, as far as i can remeber the SD1 does not have the 2 studs above the master cylinder where as a Sherpa does.
The SD1 also had brake fluid level sensor built into a larger cap on the resivior.Also could be wrong [:I] but the brake pipes on a SD1 master cylinder exit on the other side to the one shown but not 100% sure [?]
Cheers John.

LIVE LIFE A QUARTER OF A MILE AT A TIME!
1979 3.5 FHC(STATUS PENDING!!)
Image
1982 2.0 DHC Soon to be a 4.6 fire breather!!
Read My Blog http://www.waringstowntr7s.co.uk/blogs/ ... hp/John215

saabfast
TRiffic
Posts: 1936
Joined: 03 Feb 2006 08:17
Location: Bexhill-on-Sea

Postby saabfast » 30 Jan 2008 23:09

You are probably right. Looks the same as my uprated unit from S&S. I asked if it came from an SD1 and they said no, but declined to say which unit it was. Works well anyway.

Alan
Saab 9000 Stg 1
'81 TR7 DHC
Image

Rblackadar
TRiffic
Posts: 1782
Joined: 06 Jun 2004 06:12
Location: USA
Contact:

Postby Rblackadar » 31 Jan 2008 02:34

Judging by the paint, it looks like the guy is just taking whatever unit he can find and painting it over with POR-15 to hide how used it is leaving the buyer to fend for himself as far as it's mechanical reliability.

samco
Wedge Pilot
Posts: 315
Joined: 25 Feb 2006 20:00
Location: United Kingdom
Contact:

Postby samco » 31 Jan 2008 18:20

When my replacement arrives I will strip it down and let you its condition.

If it doesn't fit you obviously need a bigger hammer.

www.metronewquay.co.uk www.wheelintheheel.co.uk

Check out my album

http://s163.photobucket.com/albums/t299/samco_bucket/

My youtube progress http://www.youtube.com/watch?v=4kMDqLU1N7Y



1980 Californian import converted to right hand drive V8. Under construction.
ImageImageImage

Steve @ SandS
Wedge Pilot
Posts: 397
Joined: 14 Nov 2003 20:02
Location: North West
Contact:

Postby Steve @ SandS » 31 Jan 2008 18:42

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Rust Restorer</i>

I think the upgraded one sold by Robsport is an SDI item.Image
Andy
1980 DHC Cashmere Gold
1981 FHC Persian Aqua Blue
www.andys-tr7.co.uk
Image
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Bit of a tip, you really should change the resevoir to the angled TR7 one.

Steve @ S&S Preparations

Rust Restorer
Wedge Pilot
Posts: 286
Joined: 06 Sep 2005 20:04
Location: United Kingdom
Contact:

Postby Rust Restorer » 31 Jan 2008 20:18

Thanks Steve, have one on the FHC, bet you have a secondhand one.

Andy
1980 DHC Cashmere Gold
1981 FHC Persian Aqua Blue
www.andys-tr7.co.uk
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 92 guests