Anonymous

Servicing parts. Where can I get them from?

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
Orophin
Rust Hunter
Posts: 119
Joined: 17 Oct 2007 19:12
Location: United Kingdom
Contact:

Servicing parts. Where can I get them from?

Postby Orophin » 18 Nov 2007 08:51

I'd like to give my new car a full service, since it's been left in a warehouse for 6 six years. What would you advise me to replace and where would I get it all from? And how much roughly would it cost. I need a new distributor btw, and new silcone leads would be nice.

ngtf
Wedge Pilot
Posts: 427
Joined: 13 May 2004 18:56
Location: United Kingdom
Contact:

Postby ngtf » 18 Nov 2007 09:04

Robsport ([url]www.robsport.co.uk), S&SPreparations ([url]www.ss-preparations.co.uk[/url]) or Rimmer Brothers (http://www.rimmerbros.co.uk) all do excellent parts services, Robsport do an excellent next day despatch service, S&S can be a little slower at despatch and Rimmers are generally more expensive. They all do all parts and service items and each do good catalogues although Rimmers is the best book around.

General service items, oil, filter, air filter, plugs, points, leads, cap and rotor arm should be around £60ish plus postage.

A new distributor wont be cheap but both Robsport and S&S do quality secondhand parts. They also come up on Ebay from time to time. I got a new old stock distributor off ebay for about £12.00 though that was very lucky!

Regards

Gary

Eeyore rides again !!
Image
EOR14W - Persian Aqua 2L Dhc, Now rebuilt and looking lovely - Sprint engine being prepared!

bmcecosse
TRemendous
Posts: 2399
Joined: 14 Apr 2007 21:54
Location: United Kingdom
Contact:

Postby bmcecosse » 18 Nov 2007 15:13

I very much doubt you will need a whole new dizzy - just put new points/condenser/rotor arm and cap on the one you have - but maybe it's been converted to electronic? And fit new spark plugs - possibly with new leads if you really want them, although they usually last a long time!
Otherwise - change oil and filter, and drain and flush the cooling system and refill with the correct % of good quality antifreeze. Look at the water hoses to see if they need changing - and a new fan belt would likely be a good idea.
Drain /refill the gearbox and the rear axle - and attend to the brakes - probably a good idea to bleed new fluid through them (and the clutch) while you are at it.
And - inspect the tyres carefully - they may have developed cracks if the car's been standing on them in the one spot for 6 years!

ImageImage

Chris Turner
TRemendous
Posts: 2716
Joined: 12 Apr 2004 13:25
Location: United Kingdom

Postby Chris Turner » 18 Nov 2007 22:36

I would add James Paddock to the above suppliers list, especially if you live near.

www.triumphtr.co.uk
SJW 539S TR7 sprint
1980 TR7 Premium.

Orophin
Rust Hunter
Posts: 119
Joined: 17 Oct 2007 19:12
Location: United Kingdom
Contact:

Postby Orophin » 19 Nov 2007 16:12

Thank you very much very helpful, i'll print this out! Thank you [:)]

mak
Wedge Pilot
Posts: 313
Joined: 26 Oct 2005 15:23
Location:
Contact:

Postby mak » 20 Nov 2007 22:17

Mahle/knecht do excellent filters if you can find a supplier locally.

As well as all the advice above i'd drain any old petrol and check the tank and fuel lines for leaks and be careful when firing it up for the first time.

Post Reply

Who is online

Users browsing this forum: No registered users and 368 guests