Postby Hasbeen » 11 Nov 2018 01:16
There are a number of different fuel tank & breather systems used on 7s.
On some tank systems in Oz cars, the breather is on the filler neck, rather than on the tank. As the filler pipe is well below the level of the top of the tank, such systems have a moderate air pocket trapped above the fuel in the tank.
Petrol coming from a cool underground tank will be cool, & will cool this pocket of air. As the air in the pocked warms on a warm day, it will expand quite a bit, & can push fuel out of the filler, if it is not sealed.
It is not just 7s that have this habit. On one occasion I filled my Honda S2000 & went to pay, foolishly before fitting the sealing cap. When I came back to the car just a couple of minutes later, petrol was welling up & out of the filler by expansion of air trapped in a similar pocket in the tank.
You could of course have a pin hole in the filler, breather, or the supply hose from the tank. Be careful of some fuel & oil hoses on the market at the moment. I replaced all my fuel hoses with theoretically good quality hose, [branded Gates} a little while back. This split with in 12 months.
We fitted new hose to the gearbox oil cooler on the 8 just after that. That "quality" hose burst in just 18 kilometres. The local drag race gearbox builder told us to use only hose branded "made in USA" as some manufacturers have started making hose in India &/or Mexico, with disastrous results.
Hasbeen