Anonymous

Circuit Diagram in AutoCad format

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Howard_B
Rust Hunter
Posts: 167
Joined: 09 May 2015 16:11

Re: Circuit Diagram in AutoCad format

Postby Howard_B » 26 May 2017 09:49

Links to PDF copies of final drawings covering lighting circuits, windscreen wiper/washer & flasher/hazards circuits. Link to earlier sketch has been cancelled

https://drive.google.com/open?id=0B0OCjgNgn85aaHl0b3lDTi1kbVE

https://drive.google.com/open?id=0B0OCjgNgn85aem1SSVQ3cjJJZkk

Balance to follow during June along with the AutoCAD dwg file

Howard

Howard_B
Rust Hunter
Posts: 167
Joined: 09 May 2015 16:11

Circuit Diagram in AutoCad format NOW AVAILABLE

Postby Howard_B » 03 Jun 2017 07:11

I have completed the drawings and they can be downloaded from the following link:-

https://drive.google.com/open?id=0B0OCjgNgn85aLXNqT29uMExBSmM

The folder includes:-

1) TR7 wiring diagram Rev 1.dwg
(Produced using Draftsight, so you will get a warning message when opening which can be ignored. Contact me if you need a copy in a different version of AutoCAD)

2) TR7.jpg
(This must be saved in the same folder as the TR7 wiring diagram because it is embedded sheet 1)

3) TR7 1980 wiring diagram.pdf & TR7 1980 wiring diagram key.pdf
(This is from the paper copy of the workshop manual that came with my car and includes most of the 1981 changes. The manuals I found on the web are for older versions)

A couple of points to be noted:-

A) There is an intermittent wipe function on my wipers, but there is no information in my manual so it is missing from these drawings.

B) The original drawings show detail changes in wiring & wire colours. I have noted some wiring changes on the drawings but this is not a complete list so you need to check your car.

Cheers

Howard

Howard_B
Rust Hunter
Posts: 167
Joined: 09 May 2015 16:11

Re: Circuit Diagram in AutoCad format

Postby Howard_B » 03 Jun 2017 12:59


oliviertr7
Scuttle Shaker
Posts: 55
Joined: 16 Mar 2018 19:57
Location: FRANCE

Re: Circuit Diagram in AutoCad format

Postby oliviertr7 » 17 Mar 2018 10:04

hello howard
I am currently restoring a harness on my tr7, I allowed myself to download your file in pdf, thank you
Olivier
Image

allzway
Scuttle Shaker
Posts: 68
Joined: 01 Dec 2008 00:42
Location: Paris, Texas
Contact:

Re: Circuit Diagram in AutoCad format

Postby allzway » 23 Mar 2018 15:25

Nice work.. that is a pretty tough job.

Post Reply

Who is online

Users browsing this forum: No registered users and 214 guests