Anonymous

What's going on here then ?

The all purpose forum for any TR7/8 related topics.
stevie_a
TRemendous
Posts: 3326
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

What's going on here then ?

Postby stevie_a » 03 May 2017 17:51

I was out in the car on Monday, driving on a short motorway drive ( 10 miles )

on the drive the gear stick suddenly started moving about, it was very sloppy going in and out of gear.

i took the gator of to have a look when i got home, this is what i seen.

what do you think ?

https://drive.google.com/open?id=0B3wPshHvCeiiYWV6dTFrc1FQcUU
If it's not broke don't fix it.

Tamas Petrunin
Scuttle Shaker
Posts: 75
Joined: 05 Mar 2016 21:04
Location: In the garage (UK)

Re: What's going on here then ?

Postby Tamas Petrunin » 03 May 2017 18:43

I'd say the bolts that fasten the gearbox remote to the gearbox have come undone, if your really unlucky then the castings have broke.

IF it's a LT77 box and it looks like it could be to me, it's the 2 bolts I've highlighted in red.

lt77.jpg
lt77.jpg (104.98 KiB) Viewed 8129 times
Cheers TP
Driving a V8 Inca Yellow fhc, now begins the endless quest of tinkering...

Beans
TRemendous
Posts: 7795
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Re: What's going on here then ?

Postby Beans » 03 May 2017 19:29

Yes the rubber bushes around the 4 mounting bolts of the extension have disintegrated by the looks of it ...
Image
1976 TR7 FHC (currently being restored ...)
1980 TR7 DHC (my first car, a.k.a. Kermette)
1981 TR7 FHC (Sprint engined a.k.a. 't Kreng)

http://www.tr7beans.blogspot.com/

stevie_a
TRemendous
Posts: 3326
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Re: What's going on here then ?

Postby stevie_a » 03 May 2017 20:10

God hope it is not the remote that's snapped

Looking at your blog Beans but cant see anything on it ,do you have anything i could see ?

Is it these bushes ??


http://www.ebay.co.uk/itm/Triumph-TR7-T ... o3gGzkj8Yg
If it's not broke don't fix it.

Beans
TRemendous
Posts: 7795
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Re: What's going on here then ?

Postby Beans » 03 May 2017 20:28

stevie_a wrote: ... Looking at your blog Beans but cant see anything on it ...

You should try harder :mrgreen:
http://tr7beans.blogspot.nl/2008/08/dhc-gearbox-check.html
Image
1976 TR7 FHC (currently being restored ...)
1980 TR7 DHC (my first car, a.k.a. Kermette)
1981 TR7 FHC (Sprint engined a.k.a. 't Kreng)

http://www.tr7beans.blogspot.com/

stevie_a
TRemendous
Posts: 3326
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Re: What's going on here then ?

Postby stevie_a » 03 May 2017 20:45

Point taken

ImageImage

Many Thanks AGAIN !
If it's not broke don't fix it.

Monkeyzak
Rust Hunter
Posts: 203
Joined: 02 Feb 2017 18:58
Location: Near Glasgow

Re: What's going on here then ?

Postby Monkeyzak » 03 May 2017 21:23

Stevie

On a positive note. I've just replaced these myself and as you will see if you read my posts I am proper hopeless!! Changing them totally Changed the driving. Surprisingly smooth gear change for an old car.

A cheap easy fix

stevie_a
TRemendous
Posts: 3326
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Re: What's going on here then ?

Postby stevie_a » 03 May 2017 21:41

Monkeyzak wrote:

A cheap easy fix


Now that is words a Scotsman likes to here :D
If it's not broke don't fix it.

Monkeyzak
Rust Hunter
Posts: 203
Joined: 02 Feb 2017 18:58
Location: Near Glasgow

Re: What's going on here then ?

Postby Monkeyzak » 04 May 2017 10:31

When I say cheap. I did spend £500 on tools to let me do the job. But to the Mrs it was £16 in parts!!

So a bargain we'll all agree.

Cobber
TRemendous
Posts: 2486
Joined: 19 Sep 2005 10:03
Location: Australia
Contact:

Re: What's going on here then ?

Postby Cobber » 04 May 2017 12:31

Tools aren't an expense, they are an investment!
"Keep calm, relax, take a deep breath, focus on the problem & PULL THE BLOODY TRIGGER"

'80 Triumph TR7.
'97 Ford Falcon Longreach 'S' ute,
'98 MG-F.
'83 Jaguar XJ6 Sovereign S3.

FI Spyder
TRemendous
Posts: 8917
Joined: 03 Jul 2006 19:54
Location: Canada

Re: What's going on here then ?

Postby FI Spyder » 04 May 2017 15:04

The cost of tools are usually equal to the cost of labour saved, there after they are free so they really don't cost anything at all.
- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 2013 Volt - Yellow TCT

Monkeyzak
Rust Hunter
Posts: 203
Joined: 02 Feb 2017 18:58
Location: Near Glasgow

Re: What's going on here then ?

Postby Monkeyzak » 04 May 2017 18:20

Gentlemen. I used your posts when justifying the expense to my wife. Needless to say she just stared at me!!

I drove my car for 10 minutes today before it started misfiring. Makes the whole thing seem a bargain to me!

stevie_a
TRemendous
Posts: 3326
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Re: What's going on here then ?

Postby stevie_a » 05 May 2017 23:37

I repurchased the bushes from ebay , they come in a pack of 8

where do they all go ?

This video shows only 4, or am i missing something ?

https://www.youtube.com/watch?v=Kn00slYR2dU
If it's not broke don't fix it.

Beans
TRemendous
Posts: 7795
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Re: What's going on here then ?

Postby Beans » 06 May 2017 01:58

2 bushes per bolt ...
Image
1976 TR7 FHC (currently being restored ...)
1980 TR7 DHC (my first car, a.k.a. Kermette)
1981 TR7 FHC (Sprint engined a.k.a. 't Kreng)

http://www.tr7beans.blogspot.com/

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Re: What's going on here then ?

Postby Hasbeen » 06 May 2017 05:59

2 bolts 4 bushes at the front, 2 bolts 4 bushes at the side.

Don't look at how degraded by oil, & soggy the rear engine mount [gearbox] is while you're down under there, it will only depress you.

Hasbeen

Post Reply

Who is online

Users browsing this forum: No registered users and 93 guests