Postby fastman » 27 Oct 2016 13:26
When I did my repaint of the headliner, I was also changing the heater matrix (dash out), having the seats recovered, and installing sound deadening (no interior). This allowed me to spray all of the liner including the areas that are overlapped by other trim pieces. Remember to use light coats to avoid any drips/runs, and mask off the wires from your interior light. If I was to do it again, I would fish the wiring through the headliner for my auto darkening mirror prior to the painting work. Remember to also remove the u-shaped finisher trim from the front of the liner too. I seem to recall giving the yellowing pieces a first coat before doing the entire project.
TR7 FHC