5 peed transmission breather screw on or press fit

[tr7sprint1]

Does the breather (ukc2656) screw in or press fit after removing the breather cap?



[/URL]


<b>"GETTING SPEED OUT OF A LOW POWERED CAR IS OFTEN MORE REWARDING, THAN WITH TIRE-SMOKING BRUTES" </b>
<h4><center>http://cliffstr7sprintconversion.blogspot.com/</center></h4>

[Beans]

If I remember correctly it is screwed in place

<center>
<font color="blue"><i>1976 TR7 FHC (needs some TLC ...)
1980 TR7 DHC (my first car, a.k.a. Kermette)
1981 TR7 FHC (Sprint engined a.k.a. 't Kreng
</font id="blue"><b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="3"><font color="red">My full Blog</font id="red"></font id="size3"></b></u>[/url]</b></i></center>

[FI Spyder]

That's the way I remember it too.

- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra - Yellow TCT

[Vegas_M]

The breather screws in. The breather cap snaps onto it.

M.

[tr7sprint1]

Got it off my core trans with no problems.



Thanks guys!!!




<b>"GETTING SPEED OUT OF A LOW POWERED CAR IS OFTEN MORE REWARDING, THAN WITH TIRE-SMOKING BRUTES" </b>
<h4><center>http://cliffstr7sprintconversion.blogspot.com/</center></h4>

[DNK]

does that breather clog...or leak oil ever?

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants

[tr7sprint1]

Don't know, but it's possible. The cap can be crack fairly easy or come off (cap comes off fairly easy).

I actually don't like (breather)the setup.




<b>"GETTING SPEED OUT OF A LOW POWERED CAR IS OFTEN MORE REWARDING, THAN WITH TIRE-SMOKING BRUTES" </b>
<h4><center>http://cliffstr7sprintconversion.blogspot.com/</center></h4>