Anonymous

Cabin/cockpit ventilation

The all purpose forum for any TR7/8 related topics.
Post Reply
Marsu
Swagester
Posts: 570
Joined: 03 Oct 2009 20:57
Location: Australia
Contact:

Cabin/cockpit ventilation

Postby Marsu » 01 Jul 2010 17:53

I just noticed the following approach used on jdg941v illustrated below to provide cabin/cockpit ventilation.

Image

It seems it would allow to more V8 induction options withoput losing the fresh air feed to the cab.

Has anyone else tried this?

V8Wedgehead
Swagester
Posts: 971
Joined: 27 May 2008 22:30
Location: USA
Contact:

Postby V8Wedgehead » 01 Jul 2010 19:13

My TR8 project will eventually use the area at the back of the hood/bonnet to pull air into the carb. This is called "cowl induction". I will most likely do the same as JDG941V, hose for air to the heater core opening.

Michael
1980 TR8 FHCs; Rally Conversion #0020 & Stock #0058
Image
"If it is broken then fix it....if it is not then make it faster!"

FI Spyder
TRemendous
Posts: 8917
Joined: 03 Jul 2006 19:54
Location: Canada

Postby FI Spyder » 02 Jul 2010 02:38

The phenomenum is caused by a high pressure area at the base of the windshield so the V-8 is actually sucking it way forward. Unfortunately there is a corresponding vacuum at the rear as the gas in the tank is being sucked forward also.[:D]


TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra
Image

jclay (RIP 2018)
TRemendous
Posts: 6027
Joined: 08 Jul 2006 17:13
Location: USA

Postby jclay (RIP 2018) » 05 Jul 2010 22:27

Beans uses one that feeds from the front of the car.

Beans
TRemendous
Posts: 7795
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Postby Beans » 06 Jul 2010 17:48

Had to do that as I couldn't use one of the two holes
(wiring loom and mastercylinders being in the way)

Image

Will probably change it when I start on that car (enlarging the diamter to ø75mm


<center>Image
<font color="blue"><i>1980 TR7 DHC (my first car, now restored and back on the road)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="2"><font color="red">My Weblog</font id="red"></font id="size2"></b></u>[/url]</b></i></center>

jclay (RIP 2018)
TRemendous
Posts: 6027
Joined: 08 Jul 2006 17:13
Location: USA

Postby jclay (RIP 2018) » 07 Jul 2010 03:23

Don't forget that reproduction floor vents are now available that fit in the foot wells.

Clay

[url="http://web.mac.com/jclaythompson/iWeb/Site/Welcome.html"]My Triumph Site[/url], [url="http://web.mac.com/jclaythompson/iWeb/Technical/Intro.html"]Technical Stuff[/url], [url="http://homepage.mac.com/WebObjects/FileSharing.woa/53/wo/HJMTK8gsojtwKleP.1/0.2.1.2.26.31.97.0.35.0.1.1.1?user=jclaythompson&fpath=Triumph_Articles&templatefn=FileSharing4.html"]Download Page[/url]

Beans
TRemendous
Posts: 7795
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Postby Beans » 07 Jul 2010 17:05

Interesting, where from?

<center>Image
<font color="blue"><i>1980 TR7 DHC (my first car, now restored and back on the road)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="2"><font color="red">My Weblog</font id="red"></font id="size2"></b></u>[/url]</b></i></center>

Underdog
Wedgista
Posts: 1162
Joined: 13 Oct 2007 10:40
Location: USA
Contact:

Postby Underdog » 07 Jul 2010 20:51

Pretty sure TSI sells em. Ted lists them and other stuff on ebay sometimes.

Yep, on his site.
http://www.tsimportedautomotive.com/images/footwell[2].jpg

Well that doesn't work...lets try this
http://www.tsimportedautomotive.com/tr7_tr8.html

Jim Underwood
72 MGB BRG
80 TR8 Persian Aqua
If women don't find you handsome, they should at least find you handy.

Post Reply

Who is online

Users browsing this forum: No registered users and 210 guests