Clutch pivot bolt removal - ST 1136

[darrellw]

ST 1136, this is the tool to use to remove the clutch lever are pivot bolt. Anyone know what head is on the pivot? Will a crowfoot wrench have enough reach?

Thanks!

Darrell Walker
66 TR4A IRS-SC CTC67956L
81 TR8 SATPZ458XBA406206
Vancouver, WA, USA

[john 215]

Hi Darrell,

I am sure I just use a deep socket, will check over the weekend what size you require and get back to you.

Cheers John


LIVE LIFE A QUARTER OF A MILE AT A TIME!

1976 Speke FHC BEAUTY FITTED WITH OVERDRIVE GEARBOX

1979 3.5 FHC CURRENTLY GARDEN ART !

1982 2.0 DHC NOW A 4.6, BUILT NOT BROUGHT !!!!

[whitenviro]

Darrel: The pivot is 3/4" or 19mm. A deep socket will do it. But a socket won't work if you are trying to remove the pivot with the fork still in place, like the manual says you should. Forget that. Just reach behind the fork and wiggle the fork spring off the ball of the pivot, then you can slide the whole release bearing and fork off together. Much easier!


[/img]
1980 Pageant Blue DHC with removable hardtop.

[darrellw]

Thanks!

Yes, I was asking about removing the pivot with the arm in place, like the manual says. But I'll just remove the arm.

I also Googled ST 1136 and found this Snap On tool:

http://www.ebay.com/itm/Snap-On-Tools-3 ... ls&vxp=mtr

Looks like it would be just the right size, too!


Darrell Walker
66 TR4A IRS-SC CTC67956L
81 TR8 SATPZ458XBA406206
Vancouver, WA, USA