Anonymous

Help Needed

The all purpose forum for any TR7/8 related topics.
Post Reply
mark spalding
Wedgling
Posts: 6
Joined: 02 May 2014 14:17
Location: United Kingdom
Contact:

Help Needed

Postby mark spalding » 02 May 2014 17:27

Hello everyone,

I am a new kid on the block and as I am knocking on in years. After an illness and spent two months off work my doctor said I needed a hobby away from work and since my younger brother has always been into his classic cars. SO! As an old leyland apprentice car bodger, I thought I would look for a car to play with.

After a chat with my brother, I said, " I had not seen a TR7 for years!" On the same day he found one, so in my excitment (and my dear wifes) we got it, so far so good. I have bought many new parts through Rimmers and Robsport including a new soft top roof. As like all us men we do daft things! I got rid of all my tools, My problem now is I am having problems finding someone with the relavant tools to replace my nice new soft top roof, I am pretty sure i have all the bits and bobs needed, and I have called three companies near to where I live in Ipswich, One told me they can not do it and the other two, after countless phone calls, do not come back!

We were hoping, as it is our 30th wedding anniversary weekend of 17 May, to get the car water tight so we could get new carpets and seats in to go away with our new toy for an old fa*ts long weekend. What i am asking is there any one who has the tools and odd spare bits, who would like to earn some cash to help out? Please feel free to email at mark.spalding@ntlworld.com. text me on 07914768342 or call on Ipswich 01473 436086 and leave a message.

Thank you from a moaning old fa*t.

saabfast
TRiffic
Posts: 1936
Joined: 03 Feb 2006 08:17
Location: Bexhill-on-Sea

Postby saabfast » 02 May 2014 18:53

I am far too far away but it does not take much in the way of tools to fit a roof, more a little time and care. I think there is a write-up on jclays site. There are just some nuts (about 10mm IIRC) holding the rear base bar in, a pop rivet gun for fixing the seal strips to the header rail and a press stud fixer for the sides, plus contact adhesive. If the replacement is vinyl it is best done on a warm day or in a garage with a heater running.

Alan
Saab 9000 Stg 1 (now passed to son for his family car)
Saab 9000 2.3 FPT Auto (now gone that others might live)
Saab 9000 2.3 LPT Auto (sold on, wish I had it back)
Saab 9-5 2.3 Vector Auto Estate
'81 TR7 DHC
Image

john 215
TRemendous
Posts: 6867
Joined: 03 Dec 2006 17:12
Location: United Kingdom
Contact:

Postby john 215 » 03 May 2014 05:06

Hi Mark,

[:D] WELCOME TO THE BEST TR7 / 8 FORUM IN THE WORLD [8D]


I know not exactly on your door step but these gents are absolutely top notch, they customer made a cover to go round my roll over bar out of mohair and is perfect, both in finish fit and colour -


http://www.carinteriors.net/


I fitted my own roof and done a few others over the year and they really not that bad to do

Cheers John

ImageImageImage Image
LIVE LIFE A QUARTER OF A MILE AT A TIME!

1976 Speke FHC Beauty Now with an overdrive conversion

1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC NOW A 4.6, BUILT NOT BROUGHT !!!!

mark spalding
Wedgling
Posts: 6
Joined: 02 May 2014 14:17
Location: United Kingdom
Contact:

Postby mark spalding » 03 May 2014 13:00

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by john 215</i>

Hi Mark,

[:D] WELCOME TO THE BEST TR7 / 8 FORUM IN THE WORLD [8D]


I know not exactly on your door step but these gents are absolutely top notch, they customer made a cover to go round my roll over bar out of mohair and is perfect, both in finish fit and colour -


http://www.carinteriors.net/


I fitted my own roof and done a few others over the year and they really not that bad to do

Cheers John

ImageImageImage Image
LIVE LIFE A QUARTER OF A MILE AT A TIME!

1976 Speke FHC Beauty Now with an overdrive conversion

1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC NOW A 4.6, BUILT NOT BROUGHT !!!!

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Hi John

Thank you for your kind welcome to this site and thank you for your helpful reply, I will contact the company you sent the link for as I am getting desperate to keep my little treasure dry

Best Regards

Mark Spalding [:D]

mark spalding
Wedgling
Posts: 6
Joined: 02 May 2014 14:17
Location: United Kingdom
Contact:

Postby mark spalding » 03 May 2014 13:05

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by saabfast</i>

I am far too far away but it does not take much in the way of tools to fit a roof, more a little time and care. I think there is a write-up on jclays site. There are just some nuts (about 10mm IIRC) holding the rear base bar in, a pop rivet gun for fixing the seal strips to the header rail and a press stud fixer for the sides, plus contact adhesive. If the replacement is vinyl it is best done on a warm day or in a garage with a heater running.

Alan
Saab 9000 Stg 1 (now passed to son for his family car)
Saab 9000 2.3 FPT Auto (now gone that others might live)
Saab 9000 2.3 LPT Auto (sold on, wish I had it back)
Saab 9-5 2.3 Vector Auto Estate
'81 TR7 DHC
Image

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Hi Alan

Thank you for your reply, I have benn given another couple of numbers and if no luck my brother and myself will have a go [8)][:(] if all fails i have been told cling film works to keep water out [:D] Watch this space

Best Regards
Mark Spalding

jclay (RIP 2018)
TRemendous
Posts: 6027
Joined: 08 Jul 2006 17:13
Location: USA

Postby jclay (RIP 2018) » 09 May 2014 19:37

[url="http://jclay.me/jclay/New_Hood.html"]Installing a new hood! link[/url]

Clay

[url="http://www.jclay.me/"]My Triumph Site[/url], [url="http://www.triumphtechnical.me"]Technical Stuff[/url], [url="https://docs.google.com/folder/d/0B8MWEvqOpX3udEF4SmFQUW9RS09hbU5uNW5Wd0xrUQ/edit"]My Public Folder[/url],

Post Reply

Who is online

Users browsing this forum: No registered users and 326 guests