Front hub bearings

[Beans]

That looks a bit like the spacers on my Ford based set up which I have on the DHC.
And adding lightness is never a reason to knock someone for trying [;)]

<center>
<font color="blue"><i>1980 TR7 DHC (my first car, now restored and back on the road)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="3"><font color="red">My full Weblog</font id="red"></font id="size3"></b></u>[/url]</b></i></center>

[Stag76]

I used Honda Civic/Prelude Discs, DBA No 184. 262mm Diameter, 51mm height and 64mm centre hole. They were the closest to TR7 I could find. I made a bracket to take the caliper, bored the centre hole, and
drilled the 4-stud pattern.

TR7 Convertible
Sprint Motor
MegaSquirt EFI

[frankman]

I like the way it should be! Looking for a solution that fits internationally

Well, if you can find a suitable disc with expansion potential .. if the 260mm is still too few to Hispec Caliper (like beans .. super solution) you can take the next size, with the same adapter .. looking as the Audi disc (68mm center hole, 56,2 deep 256 or 280mm) for 13"Wheel or up

http://bremboaftermarket.com/De/Car_Dis ... aster=3854

So go on .. Morley To combine aluminum hubs with heavy Disc adapter rings is probably bullshit .. I like people who want to do something better hangers (Mitläufer) are the most [8)]

Thanks to Stag -

Beans makes almost most the TR7 to How to optimize and we all were able to benefit a lot from his knowledge - I wanted to say - Thanks

So Morley keep us up to date!

Hello from Switzerland

Frank

[Benzo]

I have a full PDF Brake spec catalogue if anyone would like it emailed.

It would be easier to browse for specs than the brembo website.



Currently back to Basics with my BMW V8 Engined Build.

[frankman]

Hello Benzo

Yes I would like a copy of the catalog .. frankman at hispeed.ch

http://s167.photobucket.com/user/frankm ... al-Drawing



Hello from Switzerland

Frank

[Benzo]

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by frankman</i>

Hello Benzo

Yes I would like a copy of the catalog .. frankman at hispeed.ch

http://s167.photobucket.com/user/frankm ... al-Drawing



Hello from Switzerland

Frank
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Frankman, i have sent you the Brake catalogue.



Currently back to Basics with my BMW V8 Engined Build.

[sydney.wedgehead]

I'd be grateful for a copy of the catalog: sydney.wedgehead@gmail.com.

[Benzo]

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by sydney.wedgehead</i>

I'd be grateful for a copy of the catalog: sydney.wedgehead@gmail.com.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

I will send a copy once Im back home at my computer.

Iain



Currently back to Basics with my BMW V8 Engined Build.

[sydney.wedgehead]

Thanks Iain.

[Morley Faulkner]

[img]][/[img][/img]][/[/img]

Finished my front hubs at last. Have left studs long as have not decided on wheels yet

[Morley Faulkner]

Finished hubs at last cocked up last attempt to post photos so here goes again

[silverseven]

hubs look sooo nice !

I fixed the pics for you [;)]

btw for the pics ,you were so close, next time just right click and copy paste the "copy image address" into the "[img- /img]" and you'll be a pro ....

Ron.