Anonymous

Front Spoiler

The all purpose forum for any TR7/8 related topics.
Post Reply
Maxwell
TRiffic
Posts: 1641
Joined: 19 Jun 2008 21:30
Location: United Kingdom
Contact:

Front Spoiler

Postby Maxwell » 10 Dec 2012 19:52

Fixed Head - 1981 - one of the last off the line.
Was the black front spoiler standard fitment by this time?
Were they rubber\composite, or plastic? My long-gone 1979 DHC looked to be rubber\composite, the one on the 'new' silver Fixed Head looks to be fibre-glass: lightweight and nasty! On the other hand, it may be plastic. Looking to paint it with some rubberized solution, or replace it, depending on what it should be!

Advise sought!


Maxwell [;)]


3.5 TR7 V8 Drop Head \ Oliver
0.7 Smart Roadster \ Oscar

TR Tony
TRemendous
Posts: 2882
Joined: 29 Oct 2004 13:38
Location: United Kingdom
Contact:

Postby TR Tony » 10 Dec 2012 20:09

Definitely standard fitment, the original is plastic, but there are fibreglass repro ones out there so maybe yours has been replaced.

Brand new original spoilers are available, Heritage part I think, Robsport advertise them, no doubt others sell them too. Just over £100 IIRC.

Tony
ImageImage
<font size="1">1981 TR7 FHC Cavalry Blue
1980 TR7V8 DHC Jaguar Regency Red - sadly sold!
1977 TR8 FHC EFI Factory development car Inca Yellow</font id="size1">

Maxwell
TRiffic
Posts: 1641
Joined: 19 Jun 2008 21:30
Location: United Kingdom
Contact:

Postby Maxwell » 10 Dec 2012 21:09

Thanks, Tony. Guess mine is an original Plastic. It's different from the same-shaped earlier one though!

Maxwell [;)]

3.5 TR7 V8 Drop Head \ Oliver
0.7 Smart Roadster \ Oscar

silverseven
TRemendous
Posts: 4451
Joined: 11 Dec 2003 23:44
Location: Canada
Contact:

Postby silverseven » 11 Dec 2012 00:19

mines a softish plastic material

Ron.
ImageImageImage

Neil_W
Swagester
Posts: 556
Joined: 12 Dec 2011 06:59
Location: United Kingdom
Contact:

Postby Neil_W » 11 Dec 2012 04:00

The front spoiler is a hollow plastic affair on mine whilst the repo fibre glass ones are a single skin sheet ie they bwere moulded front the original.

Image

john 215
TRemendous
Posts: 6867
Joined: 03 Dec 2006 17:12
Location: United Kingdom
Contact:

Postby john 215 » 11 Dec 2012 04:53

Hi

I am sure got a brand new one somewhere, the gent who owned my FHC had brought one for her but thankfully never got round to fitting it [:)] I think from what i can remember its a BL part not a 'repo'

Cheers John

ImageImageImage Image
LIVE LIFE A QUARTER OF A MILE AT A TIME!

1976 Speke FHC Beauty

1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC NOW A 4.6,ON THE ROAD NOW KICKING AR5E !!!!

Maxwell
TRiffic
Posts: 1641
Joined: 19 Jun 2008 21:30
Location: United Kingdom
Contact:

Postby Maxwell » 11 Dec 2012 07:43

I really need to brave the cold and check! My 'last' one was like that described by SilverSeven and Neil. Personally, I like the 'no-spoiler' look, an impression endorsed by the hard, gloss, plastic look it has now! Heigh-Ho


Maxwell [:D]



3.5 TR7 V8 Drop Head \ Oliver
0.7 Smart Roadster \ Oscar

Post Reply

Who is online

Users browsing this forum: No registered users and 377 guests