Anonymous

Dirty carpets?

The all purpose forum for any TR7/8 related topics.
Post Reply
TR Tony
TRemendous
Posts: 2882
Joined: 29 Oct 2004 13:38
Location: United Kingdom
Contact:

Dirty carpets?

Postby TR Tony » 03 Sep 2012 13:38

Well, I had just that in my TR8. Not worn, only a bit faded, but really grubby.

These are original green carpets, the pre formed type. So, what to do? I took the plunge & stripped out the interior, including the sill carpets. I got some biological but bleach free hand wash powder, mixed up a good solution in hand hot water in the bath, & in they went, piece by piece!

After a short soak & gentle scrub with a stiff brush, I was amazed at the dirt that was coming out. After just the sill pieces, the water was so filthy that I had to change it. I did the rest, with another change of water, then rinsed each piece under cold water from the shower. Then out over the washing line, all was dry in about 24 hours. The carpets have come up amazingly well, apart from slight fading in places they look like new.

With the carpets out, great opportunity to clean up the rest of the trim & inside the car plus waxoyl inside the sills & B posts. Carpets now fitted back in, very pleased with the huge improvement in the appearance of the interior.

PS don't forget to clean the bath afterwards[:)]

Tony
ImageImage
<font size="1">1981 TR7 FHC Cavalry Blue
1980 TR7V8 DHC Jaguar Regency Red - sadly sold!
1977 TR8 FHC EFI Factory development car Inca Yellow</font id="size1">

supercass
Swagester
Posts: 625
Joined: 07 Sep 2009 02:12
Location: United Kingdom
Contact:

Postby supercass » 03 Sep 2012 17:02

I know I keep harping on about this, but it's a shame the original spec moulded carpets are no longer available new. I would have thought there would be a large enough market to make re manufacturing the item worthwhile. supercass

MikeRotherham
Rust Hunter
Posts: 142
Joined: 25 Nov 2011 15:56
Location: United Kingdom
Contact:

Postby MikeRotherham » 03 Sep 2012 17:54

What he said[^]

rgsSpider
Wedge Pilot
Posts: 434
Joined: 30 Jul 2011 04:57
Location: USA
Contact:

Postby rgsSpider » 03 Sep 2012 20:08

+1 for new moulded carpet! Especially if they'll make the grey semi-shag for the Spider!

Randy

1980 TR7 <font color="red">Spider!</font id="red">
Image http://rgstr7spider.tumblr.com/

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Postby Hasbeen » 03 Sep 2012 23:51

Well done Tony, but you had better be careful. [:D]

Using all that water on a clapped out old car, [}:)] you'll probably have the water police on your tail.

I think you'd be well advised to keep this sin of yours very quiet. [;)]

We were lucky up to a few years ago, as an Oz car carpet company still did a formed one piece carpet for 7 to special order. I got one for the 7, but they had lost the mould by the time I wanted one for the 8.

Hasbeen

Post Reply

Who is online

Users browsing this forum: No registered users and 309 guests

cron