Postby darrellw » 29 Aug 2011 14:34
I put one in my TR8 this spring. I does fit well, though they use HUGE connectors for the wiring, and that takes a bit of fiddling to find a place for it.
I removed the center console and installed it out of the car, then put the console back with the radio in place. I purchase both the "euro-style small faceplate" and the universal faceplate. I used the universal faceplate and the old metal one to sandwich around the console, and used the euro faceplate to finish it off.
My original plan was to glue the universal faceplate inside the console, but started to worry about the glue holding up. But give that the radio is pretty well supported by the tight fit, that probably would have worked fine.
The display is hard to read in the daylight with the top down.
I mounted the SD card reader in the glove box.
Another option with this unit is that you can separate the knobs and face from the rest of unit, and mount them angled to each other. You could then have the face not be angled up so much. If I ever pull it out again, I may look at doing that.
Darrell Walker
66 TR4A IRS-SC CTC67956L
81 TR8 SATPZ458XBA406206
Vancouver, WA, USA