Anonymous

rough

The all purpose forum for any TR7/8 related topics.
Post Reply
gogs
Wedgling
Posts: 6
Joined: 09 Jul 2011 18:55
Location: United Kingdom
Contact:

rough

Postby gogs » 01 Aug 2011 18:48

any one know why it only runs smooth on half choke tried carb balance seems ok was thinkink with choke its enrichen it

saabfast
TRiffic
Posts: 1936
Joined: 03 Feb 2006 08:17
Location: Bexhill-on-Sea

Postby saabfast » 01 Aug 2011 19:37

Logic says its running too lean. Could be the carb setup or an induction leak. Check the rubber carb mountings, they often crack, and the piped connections to the inlet manifold.

Alan
Saab 9000 Stg 1
Saab 9000 2.3 FPT Auto
'81 TR7 DHC
Image

Beans
TRemendous
Posts: 7795
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Postby Beans » 01 Aug 2011 20:14

Can also be caused by partially blocked fuel line

<center>Image
<font color="blue"><i>1980 TR7 DHC (my first car, now restored and back on the road)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="2"><font color="red">My Weblog</font id="red"></font id="size2"></b></u>[/url]</b></i></center>

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Postby Hasbeen » 02 Aug 2011 00:03

Applying choke on an SU is EXACTLY the same as adjusting the mixture. Both lower the main jet, allowing more space for fuel to pass the needle.

However, half choke is a lot of richening of the mixture, so as above, you either have too much air, or not enough fuel.

Hasbeen

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Postby Hasbeen » 02 Aug 2011 04:31

Gogs how long have you had the car, & how has it been running?

A port & polish, mild cam, good exhaust system, & easy flow inlet filters, or some of these, will change the mixture requirements of an engine, & a 7 engine more than most.

If some of these have been done, you would require richer needles to re-tune for the modifications.

Has anything been changed, or did the car just start running this way?

Hasbeen

Post Reply

Who is online

Users browsing this forum: No registered users and 126 guests