Anonymous

Gave the car a start today

The all purpose forum for any TR7/8 related topics.
Post Reply
stevie_a
TRemendous
Posts: 3326
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Gave the car a start today

Postby stevie_a » 28 Dec 2010 16:19

<font color="teal"><b>Gave the car a start today after 3 months sitting under cover

started second turn of the key, was a bit damp but after a bit it sat at idle OK

But a low idle the alternator light was coming on

could this be the damp or need another alternator ??

this one is only 2 years old</b></font id="teal">

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
<font size="4"><font color="green"><i>If it's not broke don't fix it.</i></font id="green"></font id="size4">

Image Image Image http://www.smallbiztranscripts.co.uk

gaz
TRemendous
Posts: 2441
Joined: 12 Jan 2004 19:16
Location: United Kingdom
Contact:

Postby gaz » 28 Dec 2010 16:36

Could be damp give everything a spray wd40 take it for spin......
But two years sounds about right ive had two since putting
mine back on the road





It rides again..... and again wehey!!!!!!!
ImageImageImageImage

gaz
TRemendous
Posts: 2441
Joined: 12 Jan 2004 19:16
Location: United Kingdom
Contact:

Postby gaz » 28 Dec 2010 17:05

just thought stevie it could also be that your battery needs a bit more charge as its been sat for a while but from memory you use one of those battery top up trickle charger thingys don't you........

It rides again..... and again wehey!!!!!!!
ImageImageImageImage

edit...... so i don't look like a serial poster stevie.....
check the terminals are tight and not corroded and re grease if needed also check the fan belt for been overstretched/worn/slackness etc.

stevie_a
TRemendous
Posts: 3326
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Postby stevie_a » 28 Dec 2010 17:09

<font color="teal"><b>Yes Gaz I do use one of the trickle chargers</b></font id="teal">

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
<font size="4"><font color="green"><i>If it's not broke don't fix it.</i></font id="green"></font id="size4">

Image Image Image http://www.smallbiztranscripts.co.uk

fiveliters
Swagester
Posts: 512
Joined: 13 Feb 2006 02:49
Location: USA
Contact:

Postby fiveliters » 28 Dec 2010 18:34

The inexpensive route would be to test and/or top up the battery and see if that is causing your problem. I just replaced my alternator last Friday,and I'm pretty sure it was the original one (my car is a 1980). It actually worked too well-it was overcharging from time to time,and would make a horrendous squeal. New one workes just fine and is perfectly quiet as one of those things can be. Hope yours is just the battery though![;)]

jclay (RIP 2018)
TRemendous
Posts: 6027
Joined: 08 Jul 2006 17:13
Location: USA

Postby jclay (RIP 2018) » 28 Dec 2010 21:03

Steve,

There should be a bolt next to the windscreen washer bottle with four black wires attached. Remove the bolt taking care with the star washer at the very bottom. Clean all the connections and reassemble. That should help your problem with 10 minutes work.

Clay

[url="http://web.mac.com/jclaythompson/Site/Welcome.html"]My Triumph Site[/url], [url="http://web.me.com/jclaythompson/Technical"]Technical Stuff[/url], [url="https://docs.google.com/?hl=en&tab=wo&authuser=0&pli=1#folders/folder.0.0B6b9tx6hnkzLYzM5MmNhYWItZjliYS00M2QzLWE1M2YtNWNlZWIzZjExZTdm"]Download Page[/url]

tr7jim
Wedgista
Posts: 1144
Joined: 04 Nov 2003 19:47
Location: United Kingdom
Contact:

Postby tr7jim » 29 Dec 2010 12:51

steve,

I think your alternator ok and like you say just needs some time to re bed in. If you got a volt meter the battery shouold be around 12V and when the engine running about 1000rev go up to 14.5V.

Jim

whitenviro
Swagester
Posts: 757
Joined: 20 Sep 2010 19:42
Location: Seattle, Washington

Postby whitenviro » 03 Jan 2011 05:38

I have the same problem all the time; the ignition light flickers while at idle, while the dash volt meter needle is high in its range. As soon as you put a load on it, like turning on the lights or heater fan the ignition light stops flickering. (But the headlights are a little dim and flicker a bit until you get the RPMs up a bit.)

Its easy enough to change out the alternator. I already have two spares. But would this just be caused by the voltage regulator inside the back of the alternator? Any tricks to changing that out, or is it not worth the effort? This alternator turns freely and sounds smooth, so I'd hate to give up on it!

Image
[/img]
1980 Pageant Blue DHC with removable hardtop.

John Clancy
TRiffic
Posts: 1666
Joined: 07 Jan 2005 12:31
Location: United Kingdom
Contact:

Postby John Clancy » 03 Jan 2011 09:01

I'd say the alternator is on the way out. These reconditioned items can fail very quickly thanks to the cheapo electrical components now used.

Also, my Carcoon comes with a trickle charger and that has somehow managed to kill two batteries so that's a second possible failure point. Needless to say I no longer use the trickle charger.

<center><b>[url="http://www.triumphtr7.com/documents/sales/codenamebullet.asp"]Buy the story of the Triumph TR7/8 on DVD here[/url]</b></center>

Bobbieslandy
Wedgista
Posts: 1471
Joined: 15 Feb 2007 18:52
Location: United Kingdom
Contact:

Postby Bobbieslandy » 03 Jan 2011 13:00

That's an interesting point John, what happened to the batteries? did they just stop holding charge or was there signs of the battery boiling?

I can't remember without checking the drawings but isn't there a small wire, maybe 0.75mm2 attatched to the alternator? this had corroded on one of my cars a few years back causing the light to come on. I reterminated this and it sorted the problem out. I can't even remember what car this was on[:I] Check the connections first, sometimes they can look ok but are corroded underneath, especially the earth straps in the engine bay by the headlamps and the one Clay mentioned. Undo em, make them nice and shiny, add coppaslip and reterminate. This will take a while but is something you'll need to do anyway.

Rob.

ImageImageImage

Post Reply

Who is online

Users browsing this forum: No registered users and 358 guests