Page 1 of 2

engine compartment

Posted: 16 Mar 2008 07:52
by tooley
What is the best stuff to clean the engine compartment with and also the various parts of the engine

Image.

Posted: 16 Mar 2008 08:47
by busheytrader
A biker friend of mine reccomended Muc-Off but their website only refers to it's suitability for motorbikes. You'd think that it had to be compatable with almost every substance and surface (metal and paint)as bikes combine everything.

I'd like to know what's good as well.

Cheers,


Adam

TR7 V8 DHC Jaguar Solent Blue. 9.35cr Range Rover V8, Holley 390cfm, JWR Dual Port, 214 Cam, Lumention, Tubular Manifolds, Single Pipe Exh, 3.08 Rear, 200lb Spax & Solid Bushes, Anti- Dive, Granada Vented Discs & Calipers, AllyCat 5 Spokes. No Door Stickers.

Posted: 16 Mar 2008 08:52
by TR Tony
Thanks for the pic - looks a tidy & original car. Fairly early for a DHC as well being on a V plate. Got any history with it?

You can get all sorts of cleaners for the oily bits, Gunk is a well known product but there are lots like that. Try something in a spray as that should be better at directing into any hard to reach bits. Rinse off well & take care to dry well. Lubricate throttle linkages afterwards.

Keep cleaner/water away from the electrics as best you can! In fact, while you are cleaning up in the engine bay, check all the electrical connections for corrosion & clean them up too. Especially check & clean the earth points at the front of the bay behind the headlight panels as these can cause problems if not sound.

Tony
Image
<font size="1">1981 2L FHC Cavalry Blue - very original & not rusty!
1980 3.5L V8 DHC Regency Red - on the road again.</font id="size1">

Posted: 16 Mar 2008 09:20
by john 215
Hi,
Nice DHC, love the colour [8D]
As far as cleaner then Gunk is good. Please <u>do not</u> steam clean though forces water where it should never go and you will be chasing problems for days [B)] Also will get into body seams ect.
Cheers John.

LIVE LIFE A QUARTER OF A MILE AT A TIME!
1979 3.5 FHC(STATUS PENDING!!)
Image
1982 2.0 DHC NOW A 4.6 WILL BE ON THE ROAD VERY SOON!
Read My Blog http://www.waringstowntr7s.co.uk/blogs/ ... hp/John215

Posted: 16 Mar 2008 09:50
by tooley
no history im afraid,is there a site where you can find out?
plus how do i make the picture smaller?

Posted: 16 Mar 2008 19:29
by Odd
<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by tooley</i>
how do i make the picture smaller? <hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Best program to use on digital pictures in my opinion is Photoshop.

Image

Posted: 16 Mar 2008 20:20
by gaz
<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Odd</i>

[quote]<i>Originally posted by tooley</i>
how do i make the picture smaller?<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Best program to use on digital pictures in my opinion is Photoshop.

Image
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

or if you use photobucket to host them, then you can just click on the re-size button and job done in seconds

It rides again
Image

Posted: 17 Mar 2008 01:39
by FI Spyder
Virtually every imaging program will have a resize function. You get these with your digital camera, scanner etc. You can get umpteen free ones on the internet as well.

Degreassers like Gunk work well but smell like the dickens. Good for really greasey areas. For general cleaning under the hood (bonnet) I like to use a generic degreaser bought at Great Canadian Superstore (Loblaws) for about $6 per 4 litre bottle. You mix this 20 to 1 or so and spray it on with a squirt bottle. Brush it around with a brush that won't scratch the paint and hose it off with garden hose. I then blow the residual water off with a leaf blower (similar to water being blown off in a car wash). I then let it air dry making sure the ignition wires are dry and checking under the dist. cap if water was sprayed in that area. Be careful spraying water around the air filter area.

Water soluable degreasers don't smell and are much cheaper and work fine if your cleaning a greasy film and not a quarter inch of sludge.

TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra
Image

Posted: 17 Mar 2008 17:58
by jclay (RIP 2018)
Image

Posted: 17 Mar 2008 19:31
by gaz
almost looks like a different photo now...... did you
lighten /brighten/contrast it before cropping it looks like you washed it lol[:)]

It rides again
Image

Posted: 17 Mar 2008 20:46
by Beans
Also washed away the car in the background, rebuilt the shed, locked away the vacuum cleaner and tidied the garden a bit

<center>Image
<font color="blue"><i>1981 TR7 FHC Sprint (better known as 't Kreng)
1981 TR7 DHC (not very well known yet, but back on the road)
Also a 1980 TR7 DHC, 1980 TR7 DHC FI, 1981 TR7 FHC
http://tr7beans.blogspot.com/</i></font id="blue"></center>

Posted: 17 Mar 2008 22:17
by gaz
should have ran this as a competition i love a spot the difference the water patch near the passenger front wheel is also missing maybee this could be a regular feature hey jclay....[;)]

It rides again
Image

Posted: 17 Mar 2008 22:26
by jclay (RIP 2018)
Door lock gone on the garage! Notice that the walls of the garage are straight up and down? Took out the blue color from the overcast sky.

How about Saabfast's car sitting in front of a Hawaiian water fall? Hasbeen's blue car with the back ground blurred.

Posted: 18 Mar 2008 06:49
by gaz
how about that red white and blue TR7/747 that was posted the other day (ebay link) on the runway surrounded by other B/a planes lol
http://www.forum.triumphtr7.com/topic.asp?TOPIC_ID=6881

It rides again
Image

Posted: 18 Mar 2008 08:36
by Hasbeen
Hay, gaz, it is a TR7 after all. I think its much more likely an oil
patch, than a water patch, thats been cleaned up.

Hasbeen