Page 1 of 1
Starter motor solinod
Posted: 26 Apr 2017 19:32
by swordfishdani1960
Can any body tell me do you grease in the solenoid chamber
or do you leave it , as i did strip down the starter motor
to service it
Re: Starter motor solinod
Posted: 27 Apr 2017 13:56
by skertonman
When I replaced mine, I didn't grease it, just a light coating of oil on the plunger mechanism.
Re: Starter motor solinod
Posted: 28 Apr 2017 12:36
by dmtrmp6
Clean both the plunger and tube part of the solenoid then assemble dry. Do not use a lubricant (no oil or grease) as this will collect dirt and eventually lead to the plunger binding in the tube resulting in intermittent or no start. Rgds, DM