Anonymous

Clutch & Gearbox day

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
elsberry
Rust Hunter
Posts: 141
Joined: 28 Aug 2007 02:26
Location: USA
Contact:
Contact elsberry

Postby elsberry » 31 Mar 2008 22:47

Alan,
From what I have read, the North American (possibly just the US) cars needed the cable or tie bar to keep the engine from splitting apart from the transmission and flying their own separate ways.

Dave

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by saabfast</i>

Beans, I have the upper restrictor plate so need the lower one and the two proper spacers. Thanks for the confirmation.
What was it about the North Americans that they needed to tie the car together?

Alan
Saab 9000 Stg 1
'81 TR7 DHC
Image

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Top
FI Spyder
TRemendous
Posts: 8917
Joined: 03 Jul 2006 19:54
Location: Canada

Postby FI Spyder » 01 Apr 2008 01:08

I just had that discussion and someone said he had heard it was that in a frontal 5 mph collision the motor would separate from the rubber motor mounts and would run into the radiator. The cable was to keep it in place to keep damage down to an acceptable level to meet the government criteria. Also to secure it from separating from the vehicle in more severe cases. Spitfires also had it. I guess N/A vehicles with their couple tons of Detroit iron didn't need it as they would just demolish those little British cars like tanks going over some garbage cans.

TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra
Image
Top
Beans
TRemendous
Posts: 7797
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:
Contact Beans

Postby Beans » 01 Apr 2008 20:16

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by FI Spyder</i>

... in a frontal 5 mph collision the motor would separate from the rubber motor mounts ...<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Those rubber mounts, actually a whole TR7 survives a 15 mph crash into some rather sturdy hedgegrow without any damage. OK the headlights were a bit out of tune for a minute or so due to the impact[:I]

<center>Image
<font color="blue"><i>1981 TR7 FHC Sprint (better known as 't Kreng)
1981 TR7 DHC (not very well known yet, but back on the road)
Also a 1980 TR7 DHC, 1980 TR7 DHC FI, 1981 TR7 FHC
http://tr7beans.blogspot.com/</i></font id="blue"></center>
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 309 guests

cron