Can someone tell me which bolts fit in which holes?

[MikeRotherham]

Evening experts

I'm reassembling the front suspension. Could someone tell which bolts go in which holes?





Regards

[saabfast]

Memory is a trifle vague now but I think its 3A (calliper), 1B (calliper & Steering Arm) and 2C (Steering Arm). I think you have a thick spacer washer missing which goes in 2C. No doubt someone will be along to correct me shortly!

[Hasbeen]

Put everything in place, calliper, steering arm & strut, & I believe it becomes self explanatory. At least it was for me when I did it. Once things were in place it all became obvious.

Hasbeen

[REX]

If you put the longest bolt in the wrong place, it will lock up the disc. Before putting the wheel back on, check everything spins freely.

[FI Spyder]

As mentioned there is a thick spacer missing. Where it all goes is self explanatory as you assemble, it will only go together one way. Personally, I'd get my sandblaster out first.

[busheytrader]

+1 for the thick washer / spacer UKC1146 for the standard brake callipers. https://rimmerbros.com/Item--i-GRID006193

[MikeRotherham]

Thanks for all your replies.
There was no thick spacer washer just the three bolts and spring washers I'm assuming because the previous owner fitted upgraded calipers.
Mike.

[busheytrader]

Hi Mike,

My Ford Capri / Granada callipers won't fit with the spacers, they have to be removed. I don't know about the other upgrades.

Adam