Page 1 of 1

Wiring loom route

Posted: 06 Feb 2017 18:48
by riley2456
I've just had the car painted with a few panels replced. It looks great but rather stupidly I didn't take enough photos before the strip down. I now find myself with a loom section dangling from the front nearside wing, which clearly needs to go to the off side. However, th exact route is not obvious.

does it go within the headlamp panel?

Re: Wiring loom route

Posted: 06 Feb 2017 19:44
by johnnyj
Hi

Apologies, I can't help with the loom but can I ask where you got the car repainted? Just that I am looking for someone to do mine. After it is done, I can call you and ask where my loom goes... :)

John

Re: Wiring loom route

Posted: 06 Feb 2017 21:54
by REPLIC8
Hi,
The loom goes across the headlamp panel from N/S to O/S. It runs between the outer panel and the bracing nearest the bonnet. The two photos show what it should be like under each headlamp pod.

Re: Wiring loom route

Posted: 07 Feb 2017 12:59
by supercass
Mine runs that route. Is there a clip(s) that should secure it to the underside of the headlamp panel? My loom is evident about half way down the panel as it seems there is nothing to hold it at the top so it slips down. supercass

Re: Wiring loom route

Posted: 07 Feb 2017 21:26
by riley2456
Thanks everyone. Really helpful responses. I think I now know how to progress!

cheers

Mike

Re: Wiring loom route

Posted: 07 Feb 2017 21:28
by riley2456
I had the car painted at Burnley Motors in Liverpool. Great job but I know the owner and got mates rates!

Re: Wiring loom route

Posted: 09 Feb 2017 19:48
by Beans
Co drivers side on a LH drive car without the headlapms.
For cars with the steering on the wrong side please mirror picture :mrgreen:

Image