Page 1 of 1
Heater Matrix seals
Posted: 28 Jun 2021 17:05
by Mals1960
Hi all, my heater matrix is ok but the seals look old and could do with replacing while the unit is out of the car. If new seals are unavailable is there any magic goop that may help create a stronger bond or restore the old rubber?
Re: Heater Matrix seals
Posted: 28 Jun 2021 21:23
by Beans
Most people fit a new matrix that does away with these seals.
There is a VAG item that fits with minimal work.
Use the search function as this has been covered before.
Re: Heater Matrix seals
Posted: 29 Jun 2021 10:23
by Mals1960
Many thanks, when you did your heater box were you able to dissassemble the blower motor to change the brushes?
Re: Heater Matrix seals
Posted: 29 Jun 2021 19:13
by Beans
I just checked is was working properly before putting it back in.
Re: Heater Matrix seals
Posted: 29 Jun 2021 23:45
by Mals1960
ok thanks, I may end up doing the same.
Re: Heater Matrix seals
Posted: 30 Jun 2021 20:05
by busheytrader
Mals1960 wrote:Hi all, my heater matrix is ok but the seals look old and could do with replacing while the unit is out of the car. If new seals are unavailable is there any magic goop that may help create a stronger bond or restore the old rubber?
If you still have the original painted mild steel heater pipes, they’ll be rusting inside the hardened seals and forcing them open.
The original ones on mine lasted about 11 years before they failed and filled the interior with steam at a T junction.
