tr7triumph.com

Hi guys, got some hardboard pieces alongtime ago, they came with the car, now the pieces that go along the sides ive fitted on fine, i even cut out the markings for the cruise lights to fit through, but daft as it seems i just cane fiqure out quite how the rear light cover ones go,i see 4 holes but on my 7 i can only find one fitting in the bodywork either side, anyone got any pics of theres by any chance??
Many thanks all

Steve

The top is secured by one black plastic push pin and the bottom by silver screw into the rear vertical surface on the inside and a silver screw the bottom surface on the outside (hidden by mat).


TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra

Hi Steve,

Triumph fitted out the boot on the cheap. The light covers have to be folded across the lines to make the required shape, a bit like Origami. You'll need all those black push pins to keep them there.

S&S Preparations make a proper carpeted rear panel to conceal the light units, looks far better than the original 'pants' cardboard!Might be worth having a word with them and see if you can still get one.

See ya. Paul

Hi guys many many thanks i have the push pin holes but maybe at some point the original holes have been covered for the screws, i'll work round that, many thanks again as always chaps



Steve

So obviously not original spec but does anyone know the source of these:




www.classiccarrunblackpool.co.uk

1981 DHC 2.0 Litre
1980 DHC pedal car
1982 DHC TR-ailer in the making

Possibly Volvo. Sure I've seen them on the 240 models.

Gavin

Hiya,
My son in law bought me some as a present when re furbing my 7. He said he got them from RIMMERS.
We used them as side indicators as the front ones especially are not too conspicuous.
He just ordered two packs of the orange side lights instead of the two orange and two red and fitted LED bulbs which came off Ebay.
Hope that helps.
Cheers, John

John are you talking about the same type with the chrome trim

www.classiccarrunblackpool.co.uk

1981 DHC 2.0 Litre
1980 DHC pedal car
1982 DHC TR-ailer in the making

Sorry matey,
no. Mine are more "flush" to the car and I have used them as indicators more than "cruise" lights. Just thought you may be able to adapt them for your needs.
Sorry my friend.
Hope you find what your looking for.
Cheers, John

The guy who owns the car has this photo of the back of them,
They were made in the UK so possibly used on UK cars?



www.classiccarrunblackpool.co.uk

1981 DHC 2.0 Litre
1980 DHC pedal car
1982 DHC TR-ailer in the making

Magnatex appear to be a similar company to Lucas, so the lights are possibly an accessory shop purchase. http://www.gracesguide.co.uk/Magnatex.
http://www.gracesguide.co.uk/File:Im196 ... gnatex.jpg

Gavin

gaz i was thinking of you today, on TR7 Register forum theres a guy from blackpool just acquired a tr7.

if you factor in the earth's rotation, we are all speeding

Simon - They've already met. Gaz chased him across town in his white Sprinter panel Van until he stopped!

Maxwell [;)]

2.0 TR7 FHC \ Current
1.8 Mazda MX5 \ Current

I have done that before when I spied another Triumph, I was in my black Granada, chased it for 3 miles, he thought I was a cop!!!!! Turned out to be a nice chap when I finally caught him [:D]

Triumph TR7 DHC
Triumph 2.5 Estate
Triumph 2000 Saloon

Mercedes 320SLK
Jaguar X-Type Estate

Kawasaki GPZ

The car is unable to handle my driving capabilities