tr7triumph.com

My heater blower lever was loose. I removed the panel to find that the lever is on a splined shaft. The lever is pushed over the shaft but is held on with only friction. My lever had worked partially off the shaft and had stripped the spline so it would not stay on very well. So I drilled a hole through the lever and into the spline and gave it a set screw. Works great and is nice and snug.

[img][IMG]http://i615.photobucket.com/albums/tt234/nickmi/TR7%201975/Yellow.jpg[/img]
nick
'79 TR7 DHC
'76 TR7 FHC

Nick, my friend, please move this to The Workshop Manual. If you can provide a photo along with it, that would be good, too.

Mildred Hargis

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Mildred</i>

Nick, my friend, please move this to The Workshop Manual. If you can provide a photo along with it, that would be good, too.

Mildred Hargis
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Will do. Unfortunately, in the heat of battle, I forgot to take snaps. It' all closed up now and I'm on to the remaining fixes necessary to get the AC up and running before summer runs out.

[img][IMG]http://i615.photobucket.com/albums/tt234/nickmi/TR7%201975/Yellow.jpg[/img]
nick
'79 TR7 DHC
'76 TR7 FHC