tr7triumph.com

Posted: **31 Mar 2014 07:55**

Hi guys

Is there a correct position for the nose Laurel Leaf decal?

Anyone got the dims if yes?

Thank,

Steve

Posted: **31 Mar 2014 09:24**

There was a series of articles in TR Driver about 5 years ago that gave all the dimensions. If you are lucky someone will be able to find a copy and email you the dimensions.

Cheers

Howard

Posted: **31 Mar 2014 12:17**

Have you given any thought to using a TR8 decal instead? I always considered the laurel leaf design to be tacky.

Mildred Hargis

Posted: **31 Mar 2014 15:25**

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Mildred

Have you given any thought to using a TR8 decal instead? I always considered the laurel leaf design to be tacky.

Mildred Hargis
<hr height="1" noshade id="quote"></blockquote id="quote">

Agreed. I used the "TR7" decal after a recent respray on the yellow car. I now have one of each and will change the brown car one as well after it is resprayed.

[img][IMG]http://i615.photobucket.com/albums/tt234/nickmi/TR7%201975/Yellow.jpg[/img]
nick
'79 TR7 DHC
'76 TR7 FHC

Posted: **31 Mar 2014 16:08**

This is what i did

found the center lines

Then the centre of the Laurel Leaf

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If it's not broke don't fix it.

http://www.smallbiztranscripts.co.uk

Posted: **31 Mar 2014 17:49**

I think the laurel looks great, your positioning is spot on Stevie.

www.triumphtrs.co.uk
THE Coca Cola car
The C+C Conversions rally car JDG 941V
TR7 Sprint SJW 530S on the road for the 1st time since 1984
TR7 Sprint SJW 539S

Posted: **31 Mar 2014 19:54**

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Chris Turner

your positioning is spot on Stevie.<hr height="1" noshade id="quote"></blockquote id="quote">

Thank's Chris [;)]

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If it's not broke don't fix it.

http://www.smallbiztranscripts.co.uk

Posted: **31 Mar 2014 20:21**

Stevie

How far from the bonnet edge is the top of the Laurel?

Steve

Posted: **31 Mar 2014 21:24**

Don't do it that way

measure from top ( near bonnet) to bottom (near bumper)

get the 50% mark do the same with the width i did it from edge of the light panel

that gave me the center do the same with the laurel.

look at this photo again and you see what i mean.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If it's not broke don't fix it.

http://www.smallbiztranscripts.co.uk

Posted: **01 Apr 2014 00:15**

Steve - is the decal just the wreath & "Triumph"? or is their clear decal keeping it all together that stays on the car after you remove the backing?

'80 DHC
Chevy V8 up front
Ford rear end down back
Lucas wiring all over

Posted: **01 Apr 2014 04:22**

It's still sandwiched between the front and backing sheets, but as far as I can tell it's the laurel only, many small pieces, not one big transparent sticker.

If that is what you meant.

Stevie, I got the meaning of he 4 Marks on the masking tape, but yours does look biased to the top (bonnet) line.

May be just an optical illusion!

Steve

Posted: **01 Apr 2014 04:57**

must be optical illusion as it is exactly in the middle.

jrich4411 as Stevie said no clear decal keeping it all together just many small pieces

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If it's not broke don't fix it.

http://www.smallbiztranscripts.co.uk

Posted: **01 Apr 2014 09:55**

Hi,

The original position of the laurel isn't in the midlle but slightly more upwards, I've got the original (Leyland) measurements at home, If I don't forget I will search them in the evening and email you a copy tomorow.

Greetings, J.

Posted: **01 Apr 2014 10:16**

I have sourced the definitive booklet detailing the correct decal positions, should be with me within the next couple of days. However, it seems that these were 'hand-applied' in the factory and no two are exactly the same anyway, so don't worry!

Maxwell TRDC Editor

2.0 TR7 FHC \ Current
1.8 Mazda MX5 \ Current

Posted: **01 Apr 2014 18:23**

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Triumph TR7V8 coupÃ©

Hi,

The original position of the laurel isn't in the midlle but slightly more upwards, I've got the original (Leyland) measurements at home, If I don't forget I will search them in the evening and email you a copy tomorow.

Greetings, J.
<hr height="1" noshade id="quote"></blockquote id="quote">

Hi,

had a look in my shed and found the article but it says that measurements have been taken from different cars and none of them was the same, according to the folder I have there is no documentation from the factory how to position the nose decal. Also, the folder I have only speaks of the TR8 decal.

Greetings, J.

tr7triumph.com

Nose Decal Position

Nose Decal Position