tr7triumph.com

Do you think I got my moneys worth on these ceramic coatings on my headers?
From this


To this

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants

Hi Don,

That don't look good mate [:0] looks like they have been sprayed with a rattle can ! I think I would making a call to the coaters, it not ' stuck ' to the metal for some reason.

Cheers John


LIVE LIFE A QUARTER OF A MILE AT A TIME!

1976 Speke FHC Beauty Now with an overdrive conversion

1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC NOW A 4.6, BUILT NOT BROUGHT !!!!

I decided after looking at it for a couple days that
"That ain't right"
So I email them and they responded immediately when asked if they were suppose to rust
They said
"<i>Absolutely not. Get them to us and we'll strip and recoat them for you.
</i>"

So now I need to find a BIG box to send to them.
I use to live a 45 minute drive away.
Now I am 2900 miles away


Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants

May I politely and respectfully suggest you purchase and install some high temperature sleeves for the spark plug wires. They appear to be ready to melt from contact with the header pipes.

Mildred Hargis

Mildred my fine friend.
The reason they are there is that the dizzy is on the bench as I decide what to use as a cover for the now removed vac diaphragm.
That is not their ordinary position.Good catch though

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants