Seat Foam
Posted: 04 Feb 2014 11:54
by kermit
Any recommendations on how to reattach the foam seat back to the side panels? The original tape has ripped.
1980 TR8 DHC
Poseidon Green
Posted: 04 Feb 2014 13:32
by Neil_W
Since you have gone this far have you thought about fitting new foams ?
On this side of the pond they are about $75 each
http://www.rimmerbros.co.uk/Item--i-GRID006301
Other than that Gaffer Tape is an option.
Posted: 04 Feb 2014 14:06
by darrellw
When using gaffer tape (duct tape over here), spraying with trim adhesive will help it stick to the foam. You can also pack any tears with some loose cotton batting before taping to build them back up.
Darrell Walker
66 TR4A IRS-SC CTC67956L
81 TR8 SATPZ458XBA406206
Vancouver, WA, USA
Posted: 04 Feb 2014 15:06
by kermit
I considered using duct tape but there wasn't much bond strength to the foam. Spray adhesive on the tape may be the way to go.
1980 TR8 DHC
Poseidon Green