Seam sealer

[dursleyman]

Just wondering if our UK based folks have any recommendations of a good non-hardening seam sealer. Starting to put stuff back on my project car and need some seam sealer for several things like that large black metal plate that goes on top of the tunnel and under the gear lever rubber gaiter. Be good if its not too expensive because most of it will probably stay unused in the tube/tin for the next ten years.
What does everyone use?

Russ

1980 TR7 Sprint DHC
Dursley
UK

http://tr7russ.blogspot.co.uk/

[prlee]

Where the parts may need to be taken apart I have used Dum Dum. Got a couple of tins cause I couldnt find one once.

I last bought some over 20 years ago, still plenty left, could provide some if you dont want much.

Pete
1981 Carmelian Red 2 litre DHC.
Polybush, KYB shocks, electric fan, electric windows and electronic ignition roller bearing struts and anti-dive kit - otherwise standard
1979 Pageant Blue Spitfire 1500 - some restoration in progress.

[saabfast]

Can't remember the brand I bought but recommend you get it in a tin rather than in a tube (like mastic) unless you are going to use it all at once. I started with a tube. It was pretty good but a few weeks after opening the remains were solid despite capping with polythene.

Alan
Saab 9000 Stg 1
Saab 9000 2.3 FPT Auto (now gone that others might live)
Saab 9000 2.3 LPT Auto
'81 TR7 DHC

[Beans]

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by dursleyman</i>

... like that large black metal plate that goes on top of the tunnel <hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
For that you could use a closed cell foam rubber strip.

<center>
<font color="blue"><i>1980 TR7 DHC (my first car, now restored and back on the road)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="3"><font color="red">My full Weblog</font id="red"></font id="size3"></b></u>[/url]</b></i></center>

[dursleyman]

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by prlee</i>

Where the parts may need to be taken apart I have used Dum Dum. Got a couple of tins cause I couldnt find one once.

I last bought some over 20 years ago, still plenty left, could provide some if you dont want much.

Pete

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Pete, thanks for reminding me, I have seen a tin of Dum Dum myself in the garage somewhere. Wonder if its still OK, must be over 20 years old like yours! Been used on most of my cars from 1960's to 1990's.

Russ

1980 TR7 Sprint DHC
Dursley
UK

http://tr7russ.blogspot.co.uk/