Page 1 of 1

why so different

Posted: 05 Oct 2013 09:59
by gary mc knight
Can some one please help need pic s of. 8 inch brakes 1977 as the pic s i was sent first time are not the same on mine there is to small ones don t know where they go. And hand brake leaver is keeping hub out thank you



Hi jclay or anyone has any body got any idea about 8 inch brakes on the 7 as got mind built up again but hub won't sit right as hand brake lever is keeping it out any pic r. Would help thanks also has two very small springs in it ......


Image

Posted: 05 Oct 2013 20:14
by busheytrader
Are the exploded diagrams on the Rimmers site any use?

They're straight out of the Leyland parts books http://www.rimmerbros.co.uk/Item--i-GRID006199

Adam

Image Image

TR7 V8 DHC Jaguar Solent Blue. 9.35cr Range Rover V8, Holley 390cfm, JWR Dual Port, 214 Cam, Lumention, Tubular Manifolds, S/S Single Pipe Exh, 3.08 Rear, 200lb Spax & PolyBushes all round, Anti- Dive, Strut-Top Roller Bearings, Capri Vented Discs & Calipers, Braided Hoses, 4 Speed Rear Cylinders, Uprated Master Cylinder & Servo, AT 14" 5 Spokes or Maestro Turbo 15" Alloys, Cruise Lights, S/S Heater Pipes, Replacement Fuel Tank. No Door Stickers. Mine since July 1986, V8 from 1991 courtesy of S&S V8 conversion and big brake kits.