tr7triumph.com

Anyone know if you can use m16 calipers with tr8 discs. thanks

Mark

Hi Mark
M16 have the same Bolt Pattern (Distance) 3.25" 82.55mm

You could also use some Toyota 4 Pot Caliper some are also 82.55mm .. if they work with the TR8 Disc , I don't know..

Thank you. According to www.rockauto.com, I think the parts are:

Raybestos RC3466 (left) and RC3465 (right) - used on the 1979-85 Pickup and 84-85 4Runner for the fully loaded calipers including pad. $52 each plus $10 core charge.

A friend is working this project, he bought a set of calipers from a Toyota T1004x4 (93) and the bolt spacing is 3,25 inches$

Hello from Switzerland

Frank

thanks Frank. good info and I will check out.

Mark

I have M16 calipers on mine but I turned up alloy adaptors to allow me to use Ford Cortina discs. The calipers bolt straight on, you will need a shim (aka washer) between the caliper and steering arm.

I believe with a caliper spacer kit I could also fit capri vented discs on the same adaptors, but have never felt the need.