tr7triumph.com

I remember talking to a member of here some time ago about bleeding the breaks and the clutch system on your own, by using bleeding nipples/nuts that fitted our tr's. They were spring loaded and allowed you to do the whole bleeding on your own.

I am unable to find the link and the ones we need (breaks and clutch)for our cars. Can anyone help with this search of mine?

I think I have found the link, just need to find out the ones needed now for the breaks and clutch:

http://www.speedbleeder.com/

Phi Check your local FLAPS.
I got mine of the shelf for my Wedge after paying more for the Speed Bleeders for other cars

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by UKPhilTR7</i>

bleeding nipples<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">


<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by DNK</i>

Phi Check your local FLAPS.<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">


<font color="teal"><b>You don't want to know what is going through my mind at the minute</b></font id="teal">..... [:I][:I][:I][:I][:I][:I][:I]


------------------------------------------------------------------------------------------------------------------------------------------------------------------------
<font size="4"><font color="green"><i>If it's not broke don't fix it.</i></font id="green"></font id="size4">

http://www.smallbiztranscripts.co.uk

Lol i thought that when i wrote it

Phil,
this has been discussed lots of times on the mail list over the years:
The front brake caliper bleeder screws RTC 1466
is roughly equivalent to the Speedbleeder SB7100S.

The rear brake cylinder bleeder screws RTC 1526
is roughly equivalent to the Speedbleeder SB1010S.

The clutch slave cylinder bleeder screw RTC 1115
is roughly equivalent to the Speedbleeder SB1010S.

All of them are also available in stainless steel. Which is nice...

Hi Odd,

Thank you so much for this it will be a great help. I will add this to my documents to make sure I have it from now on, but an order is on the cards soon