tr7triumph.com

Having trouble removing front fenders, need a couple pointers. Thank you.

There are spot welds every where! Only the door jamb and head light header panel bolt on. Spot welds are in the wheel arch, engine bay and bottom rear of the fender.

Michael
1980 RALLY TR8 FHC #0020

Thank you, First of many questions. Taking apart a parts car. And I have seen some very good topics that will be helpful as we start the rebuild.

Hi,


[:D] WELCOME TO THE BEST TR7 / 8 FORUM IN THE WORLD EVER [8D]

Down load the welding document from my learned freinds JClay site, gives you a clue were the welds are -

https://docs.google.com/folder/d/0B8MWE ... YnlPbXJPdw

Any details on your car or picture is always good to read and look at.

Cheers John


LIVE LIFE A QUARTER OF A MILE AT A TIME!

1976 Speke FHC Beauty

1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC NOW A 4.6,ON THE ROAD NOW KICKING AR5E !!!!

Thank you, First of many questions. Taking apart a parts car. And I have seen some very good topics that will be helpful as we start the rebuild.

Sorry, I replied before I cleared. I am looking forward to checking all this out. SO glad we found this site.

1979 TR7 convertible. Looking to put a roll bar in later. Pictures will be later.