tr7triumph.com

Does anyone know of a suitable near as original replacement for the grey foam strip fitted to the top and bottom of the instrument cluster ?

I use a 1/2" X 3/16 neoprene foam rubber strip, with one side adhesive. It is available from most marine shops, & specialist rubber outlets.

Ordinary foam rubber is not much use, as it compresses completely in a very short time.

Hasbeen

Hi,

[:D] WELCOME TO THE BEST TR7 / 8 FORUM IN THEVWORLD EVER [8D]

How about a look around B & Q and such like, maybe some draft excluding foam, the sort used around window's etc [?]

Cheers John


LIVE LIFE A QUARTER OF A MILE AT A TIME!

1976 Speke FHC Beauty

1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC NOW A 4.6,ON THE ROAD NOW KICKING AR5E !!!!

I did just that, bought a roll of self adhesive foam strip from a DIY store.


1980 Persian Aqua DHC

Navigate to cpc.co.uk homepage then search for MDM-5 speaker acoustic foam strips.

Inexpensive & looks just like the original when in place. It's a tad narrower in width than original but if you position it carefully you will not notice. I think there are 5 strips in a bag so plenty for the job.

Tony

<font size="1">1981 TR7 FHC Cavalry Blue
1980 TR7V8 DHC Jaguar Regency Red - sadly sold!
1977 TR8 FHC EFI Factory development car Inca Yellow</font id="size1">