power steering
Posted: 11 Dec 2011 19:06
hi has any one fitted elec power steering to a tr7 v8 if so could you tell me what parts are needed and how to fit some people use corsa c is that right thanks jim
tr7triumph.com
The biggest site dedicated to TR7s on the web
https://www.tr7triumph.com:443/
power steering
Page 1 of 1
Posted: 11 Dec 2011 19:49
Yes. S&S do it now and then...
Posted: 14 Dec 2011 22:29
I plan to tackle this ,this winter . Time allowing
Don
"No More Cars For You"
71 TR6- Perpetual remodel
80 TR7 V8 Kick in the pants
Don
"No More Cars For You"
71 TR6- Perpetual remodel
80 TR7 V8 Kick in the pants
Posted: 15 Dec 2011 06:13
Hi,
Its a shame that MGF or MGTF EPAS columns are not suitable as plenty of them out there at reasonable money. The motor points upwards so at a guess would hit the dash assembly. Also has a seperate control unit.If i remember the control units were made by Mitsibushi and the whole system was at the time, for a MGF [:p] , reliable!
http://www.ebay.co.uk/itm/MG-TF-MGF-Adj ... 564362b060
http://www.ebay.co.uk/itm/MGF-MGTF-KIT- ... 3a61c15333
There has been a return to EPAS system, a lot of the smaller BMW's i work on use it, the motor is now bolted to the rack.
Cheers John
LIVE LIFE A QUARTER OF A MILE AT A TIME!
1976 Speke FHC Beauty
1979 3.5 FHC(STATUS PENDING!!)
1982 2.0 DHC NOW A 4.6,ON THE ROAD NOW KICKING AR5E !!!!
Its a shame that MGF or MGTF EPAS columns are not suitable as plenty of them out there at reasonable money. The motor points upwards so at a guess would hit the dash assembly. Also has a seperate control unit.If i remember the control units were made by Mitsibushi and the whole system was at the time, for a MGF [:p] , reliable!
http://www.ebay.co.uk/itm/MG-TF-MGF-Adj ... 564362b060
http://www.ebay.co.uk/itm/MGF-MGTF-KIT- ... 3a61c15333
There has been a return to EPAS system, a lot of the smaller BMW's i work on use it, the motor is now bolted to the rack.
Cheers John
LIVE LIFE A QUARTER OF A MILE AT A TIME!
1976 Speke FHC Beauty
1979 3.5 FHC(STATUS PENDING!!)
1982 2.0 DHC NOW A 4.6,ON THE ROAD NOW KICKING AR5E !!!!
Posted: 15 Dec 2011 10:14
<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by john 215</i>
There has been a return to EPAS system, a lot of the smaller BMW's i work on use it, the motor is now bolted to the rack.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
same thing here at General Motors for the past half decade or so......
Ron.
There has been a return to EPAS system, a lot of the smaller BMW's i work on use it, the motor is now bolted to the rack.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
same thing here at General Motors for the past half decade or so......
Ron.