Anonymous

Oil Pressure Sensor, Leaks Again!

The all purpose forum for any TR7/8 related topics.
Post Reply
trekcarbonboy
Swagester
Posts: 940
Joined: 18 Oct 2010 15:38
Location: USA

Oil Pressure Sensor, Leaks Again!

Postby trekcarbonboy » 09 Jul 2011 17:19

Out running some errands in the 7 and the car was running GREAT! I even thought to myself how nice it was running. Got home only to see a large puddle of oil under the car.[:(] From where it was I figured it was the oil sensor. So I started the car and out the oil squirted! Fortunately I keep a spare on hand so this will be a quick fix. I hope the oil level didn't drop too low. The dash light never came on and I have no idea how long it was leaking, car sounded fine so I don't think any harm was done. This is the 2nd one in about 20K miles! Why make such a crappy part for such an important part of the engine!?[:(!]
I hope everyone keeps a spare one in the car.

Craig '75 2.0 FHC
Image

Marko
Wedgista
Posts: 1018
Joined: 20 Aug 2006 16:53
Location: Croatia
Contact:

Postby Marko » 09 Jul 2011 17:51

are you shure you didnt tear out the thread in the oil transfer case?

trekcarbonboy
Swagester
Posts: 940
Joined: 18 Oct 2010 15:38
Location: USA

Postby trekcarbonboy » 09 Jul 2011 21:24

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Marko</i>

are you shure you didnt tear out the thread in the oil transfer case?


<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Yup! The oil is coming right out the plastic of the sensor. Can't miss it.

Craig '75 2.0 FHC
Image

busheytrader
TRemendous
Posts: 3145
Joined: 14 Oct 2007 17:49
Location: United Kingdom
Contact:

Postby busheytrader » 09 Jul 2011 22:27

Some things don't change.

The same thing happened with my Golf a few months ago.......

Adam

Image Image

TR7 V8 DHC Jaguar Solent Blue. 9.35cr Range Rover V8, Holley 390cfm, JWR Dual Port, 214 Cam, Lumention, Tubular Manifolds, S/S Single Pipe Exh, 3.08 Rear, 200lb Spax & PolyBushes all round, Anti- Dive, Strut-Top Roller Bearings, Capri Vented Discs & Calipers, Braided Hoses, 4 Speed Rear Cylinders, Uprated Master Cylinder & Servo, AT 14" 5 Spokes or Maestro Turbo 15" Alloys, Cruise Lights, S/S Heater Pipes, Replacement Fuel Tank. No Door Stickers. Mine since July 1986, V8 from 1991 courtesy of S&S V8 conversion and big brake kits.

FI Spyder
TRemendous
Posts: 8917
Joined: 03 Jul 2006 19:54
Location: Canada

Postby FI Spyder » 10 Jul 2011 04:23

After market parts again. You never know what their quality is. (I keep a spare in trunk but the original is still going strong). Just a few miles before the Port Angeles ferry the TR6 in the group had his heater valve start leaking on his exhaust manifold again. He had asked the supplier (Octagon Motors) what sort of crap they are selling him. They apologized saying that's the sort of crap they get these days, nothing they can do.



TR7 Spider - 1978 Spitfire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra - Yellow TCT
Image

trekcarbonboy
Swagester
Posts: 940
Joined: 18 Oct 2010 15:38
Location: USA

Postby trekcarbonboy » 10 Jul 2011 18:50

All better now. Lost less then a half a quart so I followed the oil trail down the street and as best I can tell it started leaking less than 1/4 mile from home. LUCKY me!

Craig '75 2.0 FHC
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests