tr7triumph.com

Posted: **23 Apr 2011 19:40**

OK I am still having problems with my electrics

on doing my test I wondered, I know you can get an electronic flasher unit for the indicators

But can you get one for the hazards ??

If so any model numbers?

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If it's not broke don't fix it.

http://www.smallbiztranscripts.co.uk

Posted: **23 Apr 2011 20:16**

Is this what your after Stevie [?]

http://www.rimmerbros.co.uk/Item--i-GFU2204

1980 2.0 16v DHC - Polly.

Posted: **23 Apr 2011 20:17**

Hi Stevie,

These can be used for both flashers and hazards.Lot of info on what does what [?] -

http://www.tridon.com.au/Products/Produ ... 478&P=2000

Not sure about UK avalaibilty

This looks like a possabilty-

http://www.thetoolboxshop.com/0-606-00- ... 2136-p.asp

Still got hassle then Stevie ?

Cheers John

LIVE LIFE A QUARTER OF A MILE AT A TIME!
1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC NOW A 4.6,ON THE ROAD NOW KICKING AR5E !!!!

Posted: **23 Apr 2011 20:50**

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by staningrimsby

Is this what your after Stevie [?]

http://www.rimmerbros.co.uk/Item--i-GFU2204<hr <hr height="1" noshade id="quote"></blockquote id="quote">

No mate that will be the standard unit.

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by john 215

Still got hassle then Stevie ?

<hr height="1" noshade id="quote"></blockquote id="quote">

unforchantly yes John, just didn't go out to the car today

for the sake of my sanity

going out tomorrow to start again,

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If it's not broke don't fix it.

http://www.smallbiztranscripts.co.uk

Posted: **24 Apr 2011 11:29**

Just so you know

I have replaced the hazard flasher unit now with an electronic one

much better

I used the same flasher unit that fits the indicators

Halfords flasher unit No 203

and again just add an earth to the 31 pin

working great 

------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If it's not broke don't fix it.

http://www.smallbiztranscripts.co.uk

Posted: **26 Apr 2011 23:22**

I had speed problems with my indicators and fitted an electronic one I got from Robsport. Easy to wire up and now they flash at the same speed always. Robsport also sell on Ebay, have a look at item: 230612811133.
Wish I had done it sooner.

Russ

1980 TR7 DHC
Dursley
UK