tr7triumph.com

I'm confused about what I need. I need to replace this strip but Rimmers site lists a lot of numbers, many are not in stock.

Has anyone ever used the fiberglass? Why do I see some that say LH and some RH but others say nothing? Do I need a Right, a Left, and a main piece? Everything up there is going to be new, I just want to order the right stuff.

Very expensive to call Rimmers from here, so any help would be appreciated.

My car is a coupe...

For a coupe you need WKC477 & WKC478. You also need GHF1083 plastic rivets to secure the grill strips.

I guess you are using US spec running lights on each side? But if you are not then you need the UK spec blanking plates ZKC1472, with gaskets ZKC1457 & clips ZKC2539.

Tony

<font size="1">1981 2L FHC Cavalry Blue
1980 3.5L V8 DHC Jaguar Regency Red - sadly sold!
1977 TR8 FHC EFI Factory development car Inca Yellow</font id="size1">

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by cozyheatdave</i>

Very expensive to call Rimmers from here, so any help would be appreciated.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

You live a few miles too far south. On the other side of the line we only pay 4 cents a minute virtualy any where in the world (including Rimmers).[8D]



TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra

ORDERED!

Thanks guys. I got a couple used ones from Rimmers. That's all they have. I hope they're in good condition.