tr7triumph.com

I'm wiring my wiper motor. I have a diagram, but I don't have a microscope to figure all the tiny figures.

The wiper motor has five spades; 4+1 configuration.

Can anyone tell me what each one is for, and how they should be configured?

I'll be asking the same question about the headlight motor.

This is the connector I'm speaking about.
I hope someone can help.

According to my manuals (which may be different, but I don't see why):

Top Left: To fuse (light green wire)
Top Right: Limit switch for wiper parking (brown/light green wire)
Bottom Left: Motor brush (normal speed) (red/light green wire)
Bottom Right: Motor brush (high speed) (blue/light green wire)
Far Right: Not labelled on my diagram, but on the loom it's a black wire, so safe to assume that it's the earth - there must be one somewhere!

Hope that helps!

Garry

1976 2.0 (soon to be 3.5!)FHC
http://reds-tr7.blogspot.com/