Page 1 of 1
possible LED Door Light
Posted: 02 Sep 2010 17:41
by Marsu
Was browsing an online catalog and came across these LED fittings that look like they may be suitable for replacement of the orig door light, but haven't measured the door skin aperature yet.
They are distributed here by [url="http://gineicomarine.sydhub.com/"]Gineico Marine[/url], but no prices listed.
Posted: 02 Sep 2010 19:11
by Gubi
Jog my memory, but the door light is just a festoon bulb, right? If so, there are plenty of drop-in LED replacements that'll work fine. No need to replace the whole housing.
http://www.superbrightleds.com/cgi-bin/ ... stoon.html
-----
Tom
'79 TR7
'87 Alfa 75
'91 Alfa Spider
Posted: 02 Sep 2010 19:15
by Marsu
The switch pivot hinge mechanism has broken on nearly all of the lights I have, hence, I'm looking to replace them and fit a switch on the console.
Posted: 02 Sep 2010 20:24
by bmcecosse
Posted: 02 Sep 2010 20:32
by Wayne S
Tilted up - OFF
Middle - ON (when Door opens only)
Down - ON (all the time)
<b>Red 4.0 Litre V8 DHC Grinnall (with huuuuuge arches...!)</b>
Posted: 02 Sep 2010 21:00
by Bendder
Mine are
up=on all the time
center=off
down=on when doors open
Mark
1977 TR7 FHC
1978 TR7 FHC
1980 TR7 DHC
1980 Rover SD1 4.0L
Posted: 03 Sep 2010 01:08
by silverseven
<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Bendder</i>
Mine are
up=on all the time
center=off
down=on when doors open
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
mine are also just like Marks (when they work.....)
Ron.
Posted: 03 Sep 2010 02:17
by jclay (RIP 2018)
Mine are like Mark's.
Clay
[url="http://web.mac.com/jclaythompson/Site/Welcome.html"]My Triumph Site[/url], [url="http://web.mac.com/jclaythompson/iWeb/Technical/Intro.html"]Technical Stuff[/url], [url="http://homepage.mac.com/WebObjects/FileSharing.woa/53/wo/HJMTK8gsojtwKleP.1/0.2.1.2.26.31.97.0.35.0.1.1.1?user=jclaythompson&fpath=Triumph_Articles&templatefn=FileSharing4.html"]Download Page[/url]
Posted: 03 Sep 2010 02:20
by Bendder
I have actually replaced my bulbs with LED strips that have 3 lights in them, red to match the red check. They are much brighter than the original lights and look neat also. Took about 6 minutes to do.
Mark
1977 TR7 FHC
1978 TR7 FHC
1980 TR7 DHC
1980 Rover SD1 4.0L
