happiness is.......
Posted: 06 May 2010 02:45
A big box delivered from Woody's.
Headers here we go...
Headers here we go...
[;)]
tr7triumph.com
The biggest site dedicated to TR7s on the web
https://www.tr7triumph.com:443/
happiness is.......
Page 1 of 1
Posted: 06 May 2010 15:12
Congrats
[;)]
[;)]
Posted: 07 May 2010 01:54
I am also currently awaiting my first-ever box-o-parts from the "Woodster"
Ordered last Saturday, starting to get very anxious......
Ron.
Ordered last Saturday, starting to get very anxious......
Ron.
Posted: 08 May 2010 16:00
Well , no pics ???
Did you get to install them???
[:D]
Did you get to install them???
[:D]
Posted: 08 May 2010 16:26
Boat load of new parts from the Woodster!
New press works great!
Clay
[url="http://web.mac.com/jclaythompson/iWeb/Site/Welcome.html"]My Triumph Site[/url], [url="http://web.mac.com/jclaythompson/iWeb/Technical/Intro.html"]Technical Stuff[/url], [url="http://homepage.mac.com/WebObjects/FileSharing.woa/53/wo/HJMTK8gsojtwKleP.1/0.2.1.2.26.31.97.0.35.0.1.1.1?user=jclaythompson&fpath=Triumph_Articles&templatefn=FileSharing4.html"]Download Page[/url]
New press works great!
Clay
[url="http://web.mac.com/jclaythompson/iWeb/Site/Welcome.html"]My Triumph Site[/url], [url="http://web.mac.com/jclaythompson/iWeb/Technical/Intro.html"]Technical Stuff[/url], [url="http://homepage.mac.com/WebObjects/FileSharing.woa/53/wo/HJMTK8gsojtwKleP.1/0.2.1.2.26.31.97.0.35.0.1.1.1?user=jclaythompson&fpath=Triumph_Articles&templatefn=FileSharing4.html"]Download Page[/url]
Posted: 08 May 2010 17:07
Jclay the shop press is from Woody??
Can't save them all but I am trying!!!
Can't save them all but I am trying!!!
Posted: 08 May 2010 17:30
Nope! $89 special at Harbor Freight! But the poly bushings came from Woody!! [:D]
And the new engine that I haven't had time to open and look at yet!!![:p]
Clay
[url="http://web.mac.com/jclaythompson/iWeb/Site/Welcome.html"]My Triumph Site[/url], [url="http://web.mac.com/jclaythompson/iWeb/Technical/Intro.html"]Technical Stuff[/url], [url="http://homepage.mac.com/WebObjects/FileSharing.woa/53/wo/HJMTK8gsojtwKleP.1/0.2.1.2.26.31.97.0.35.0.1.1.1?user=jclaythompson&fpath=Triumph_Articles&templatefn=FileSharing4.html"]Download Page[/url]
And the new engine that I haven't had time to open and look at yet!!![:p]
Clay
[url="http://web.mac.com/jclaythompson/iWeb/Site/Welcome.html"]My Triumph Site[/url], [url="http://web.mac.com/jclaythompson/iWeb/Technical/Intro.html"]Technical Stuff[/url], [url="http://homepage.mac.com/WebObjects/FileSharing.woa/53/wo/HJMTK8gsojtwKleP.1/0.2.1.2.26.31.97.0.35.0.1.1.1?user=jclaythompson&fpath=Triumph_Articles&templatefn=FileSharing4.html"]Download Page[/url]
Posted: 08 May 2010 20:26
That's the same press I bought. It works great, it made quick work of my rear suspension bushings. I feel that it has already paid for itself.
Jim Clark
'80 TR8
'97 Maxima 5spd
Jim Clark
'80 TR8
'97 Maxima 5spd
Posted: 08 May 2010 21:18
Installed yet??????
I wish. Everything with school and church (youth programs) is getting squeezed in right now before school gets out. Church lock in last night with 19 middle school kids (including my Josh). Doing a 14 hour all nighter with 19 middle schools can make you feel VERY old.
Tomorrow is mother’s day, and I will not even try to go into the garage.
Some evening next week I will start with just prepping the old bolts with penetrating oil. I do not want to break any of the off after being in place 30 years. After the penetrating oil sits a while I will start removing the old stuff.
I am not sure yet how to tie in the headers to the old exhaust system. I'm sure I need to buy a metal cutting wheel for my angle grinder to make things a little easier.
Rob
I wish. Everything with school and church (youth programs) is getting squeezed in right now before school gets out. Church lock in last night with 19 middle school kids (including my Josh). Doing a 14 hour all nighter with 19 middle schools can make you feel VERY old.
Tomorrow is mother’s day, and I will not even try to go into the garage.
Some evening next week I will start with just prepping the old bolts with penetrating oil. I do not want to break any of the off after being in place 30 years. After the penetrating oil sits a while I will start removing the old stuff.
I am not sure yet how to tie in the headers to the old exhaust system. I'm sure I need to buy a metal cutting wheel for my angle grinder to make things a little easier.
Rob